Camber Adjustment bolts

[ronin152]

Saw these on summit http://store.summitracing.com/partdetail.a...r=1#Application

 

they say they fit 1996 - 2002 but I wasn't aware that the strut design changed in 03 and 04? Will these bolts work on an 03? I don't feel like spending 30 dollars from AC.

[nissandoms47]

Those look exactly like the ones AC sells. The strut designs are the same. I'd go ahead and buy the summit ones.

 

Saw these on summit http://store.summitracing.com/partdetail.a...r=1#Application

 

they say they fit 1996 - 2002 but I wasn't aware that the strut design changed in 03 and 04? Will these bolts work on an 03? I don't feel like spending 30 dollars from AC.

[ronin152]

The bolts come in ± 2° or ± 1° which should I get? And do I only need 2 per wheel or only 1 per wheel.

[02silverpathy]

I per wheel or 1 set of two bolts should be fine...you'll just drill out both holes a little on each side and install your camber bolts in the top strut opening. You'll drill the top hole so that the camber bolt can be a little more workable and the bottom hole so that you can tilt the wheel a little further out. Get the 2 degree ones for sure!