yar1 Posted July 28, 2008 Share Posted July 28, 2008 im trying to put a cv into the pass. side of my r50, ive done the other side 3 times or so and can do it in an hour, but im having an issue with this side. i can put 2 (1 pair) of the bolts in , and get 2 more to fit in the holes, but the last two holes do not line up, is there something special on this side that needs to be done? i compared the new to the old axle an d they line up fine. any suggestions on how to get this in? Link to comment Share on other sites More sharing options...
GrimGreg Posted July 29, 2008 Share Posted July 29, 2008 Are you putting them all in loose, then tightening them up? Or are you tightening as you go? Try using a drift to get one hole lined up then put the bolt in the other, then pull the drift and get the bolt in that hole. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now