Skwerlb8 Posted May 4, 2008 Share Posted May 4, 2008 Next outting...got a new job..decent $$..getting a few important bits fixed up (shocks & brakes) and then i wanna get dirty/lost/STUCK whatever..as long as i dont see pavement! Early start..FULL day. I havent had a chance to explore up around Harrison, anyone know if its worth the trip or should i stick to Sylvester etc? Who's up for it? Link to comment Share on other sites More sharing options...
Smithk Posted May 4, 2008 Share Posted May 4, 2008 Sunday April 25th 2009? Did you mean May 25th 2008? I am confused... well yeah I may be down for a run if I finish up my bumper, get my idler arm and new centrelink before then. If not I will be hoping to finish my rear bumper this week at least, she just is good for driving around town but not for wheeling. Link to comment Share on other sites More sharing options...
Skwerlb8 Posted May 4, 2008 Author Share Posted May 4, 2008 uhh..yeah.. MAY..thats the one!! what can i say..posted before coffee.. Link to comment Share on other sites More sharing options...
porterhouse Posted May 5, 2008 Share Posted May 5, 2008 I'm heading up on the 10th to hale creek/sunrise lake with BC4x4 any one is free to come out with that, should be a nice way to learn some of the trails there. The 25th, of May that is, is lookn' good for some wheeling, as well. Keep me in the loop. :coffee!: then internet. always :coffee!: first Link to comment Share on other sites More sharing options...
Zibi Posted May 6, 2008 Share Posted May 6, 2008 Might be interested if I have the day off, still totally stock though until I have some money to burn. Link to comment Share on other sites More sharing options...
porterhouse Posted May 6, 2008 Share Posted May 6, 2008 Might be interested if I have the day off, still totally stock though until I have some money to burn. I'm a stocker as well, we won't try anything to crazy. Try to keep the "love dents" on my truck to a minimum Link to comment Share on other sites More sharing options...
87pathy Posted May 6, 2008 Share Posted May 6, 2008 I'm heading up on the 10th to hale creek/sunrise lake with BC4x4 any one is free to come out with that, should be a nice way to learn some of the trails there. The 25th, of May that is, is lookn' good for some wheeling, as well. Keep me in the loop. :coffee!: then internet. always :coffee!: first hope they don't bail on you.. i was on that site, set up wheeling trips.. and they always bailed.. you won't find me there anymore.. about as reliable as a used condom Link to comment Share on other sites More sharing options...
porterhouse Posted May 6, 2008 Share Posted May 6, 2008 hope they don't bail on you.. i was on that site, set up wheeling trips.. and they always bailed.. you won't find me there anymore.. about as reliable as a used condom it's the Sunrise Lake/Hale Creek Maintenance Run so I think at least someone should show up Link to comment Share on other sites More sharing options...
Smithk Posted May 9, 2008 Share Posted May 9, 2008 Okay Pathfinder Status: Rear Bumper - WIP (mounted with very basic welds, just need to beef it up with thicker steel, sand, and paint) Centrelink and Idler Arm - Still awaiting parts Just found out I blew out my front passenger side brake rotor seal so will be replacing those ASAP so I should be good in two weekends or so. Link to comment Share on other sites More sharing options...
Skwerlb8 Posted May 9, 2008 Author Share Posted May 9, 2008 no thoughts/comments on checkin out Harrison? Anyone? Keep workin on yer truck Kyle.. You'll have it ready in time Link to comment Share on other sites More sharing options...
porterhouse Posted May 10, 2008 Share Posted May 10, 2008 no thoughts/comments on checkin out Harrison? Anyone? Keep workin on yer truck Kyle.. You'll have it ready in time Harrison is an awesome place to wheel, I've wanted to check out some of the trails there for a while. Vedder Mt. in "the wack" is high on my list of places to go explorn' Link to comment Share on other sites More sharing options...
porterhouse Posted May 12, 2008 Share Posted May 12, 2008 some shots of the V-rock at sunrise lake y'all think we should try it ? Link to comment Share on other sites More sharing options...
Zibi Posted May 12, 2008 Share Posted May 12, 2008 I think I'll pass until I get some money into my truck...rather not attempt that without skid plates or bigger tires. Link to comment Share on other sites More sharing options...
87pathy Posted May 13, 2008 Share Posted May 13, 2008 a stock pathy will walk u V-notch. The trick is to side hill it on the left.. seen it done many times. Link to comment Share on other sites More sharing options...
Skwerlb8 Posted May 13, 2008 Author Share Posted May 13, 2008 That looks like fun...i've been poking thru the backroads book..still haven't decided exactly where to go. I've heard of Sunrise Lake so why not? Sunrise it is! Zibi.. most of us run our trucks stock. We don't go out to kill ourselves and our rides. Personally..its about the challenge of unknown terrain and learning about my trucks (and my) capabilities. I run stock but with 31's. No front skid cuz of a bushbar. Anywho..come on out. It's always been worth the trip for me Link to comment Share on other sites More sharing options...
Smithk Posted May 14, 2008 Share Posted May 14, 2008 Well I am game for May 25th, 2008 and Sunrise Lake. Make a new topic post with the details to make it easier to read. Pathfinder Status: Rear bumper- Painting stage; Centrelink- Arrived installing next week once I pick up my idler arm (came in today now just got to get to N. Van) Hey pass on to DVO I saw him working on Rupert in Van. yesterday, was going to stop and say Hello but the rookie drove past as I told him to stop and did not stop, so from now on I do the driving. Link to comment Share on other sites More sharing options...
Zibi Posted May 15, 2008 Share Posted May 15, 2008 Might be starting a new job this weekend, but I'll be off monday and would love to go wheeling. Unfortunately thats supposed to be the @!*%ty day for weather. Link to comment Share on other sites More sharing options...
Skwerlb8 Posted May 16, 2008 Author Share Posted May 16, 2008 New thread started..with the correct date even!! SmithK..yer mesg was passed along Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now