Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

QX4 parts for Pathfinder?


Guest iLUVmySH
 Share

Recommended Posts

Guest iLUVmySH

do QX4 parts fit the 99 Pathfinder? More specifically, do the headlights (HID's), brushguards, taillights fit onto the Pathfinder without modification?

Link to comment
Share on other sites

hmm tricky one there. what 99 are you talking about? The 99.5 (i.e. newer looking) or the older one (96-99) If its the 99.5+ the taillights will not work because the reverse lights on the newer QX4s are located next to the license plates and not in the taillight itself. however, the 99.5 Pathfinder tail lights do fit, but you will need to make sure the sockets come with the lights as the sockets from the old lights do not fit. its a quick splice and definately worth the time. I put 99.5 tail lights on my pathy and really looks nice. hope this helps.

Link to comment
Share on other sites

Guest iLUVmySH

i have a 99 Pathfinder and would like to fit qx4 stuff on my car. Such as.. the front bumper w/ the fogs, headlights, and hid system (unless the hid system will plug right into the 99 Pathfinder's headlights - i doubt it because almost all if not all oem hid's use d2s/d2r capsules which will not stay on my 9006, H4, H7, whatever my Pathfinder's headlights are)

 

along with the front bumper components, i would like to add the clear/red tails whether it comes from a qx4 or 99.5 Pathfinder, i don't care, as long as they fit and have the similar style.

 

as for the brush guard, i'm wondering if qx4 and Pathfinder brushguards (front & rear) are compatible for convenience of searching reasons..

Link to comment
Share on other sites

im pretty shure im right Nissan owns Infiniti and the Pathfinder should interchangable with the QX4 there slight diffence between the two the QX4 is the more expensive and might have a little different bumber (as stated) or lil diferent interior but to my knowing the frame should be the samemeaing the buper should fit it might need a little triming but should fit and same goes with the brush guard. your best bet is to try to find someone on the street with a qx4 and compair the two side by side. good luck

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...