Slopy Steering...

[fondo]

I recently replaced the orignal CL and TRE'S with an assembly I picked up @ the J/Y off of a 1990 PATHY. Now (aswell as before I did the swap) my steering veers off to the left and I must correct it by turning the steering wheel so it points to the 1:30-2:00 -o- clock posistion. What can I adjust to correct this very anoying off-steer? I want it to go straight when the steering wheel is straight... Can I adjust the tre's one way or another to eliminate this, if so which way do I adjust them? I know this is an unsafe way to be drivin' so I would like to fix it asap. Also, the wheels and tires I'm runnin are 16"x31x10.50 bfg's all around that are worn more on one side than the other (drivers side has more tread on both wheel's than passenger side, especially the drivers front compared to the passengers front) I know un-even tread will affect this but I also know that if I were to buy new tires all around, I would still have this offset in the steering wheel... Is this something I can do by myself or will I mess up the toe and overall alignment. I would appreciate any feedback as I may be trying to tackle this mess tommorow along with a hot wheel hub (wheel bearing loose??).

Thanks

Oh I'm also plannin' on replacing the torn tre dust boots with energy suspension tre dust boots... They're the right size but will they work with all the ball joints on the CL and TRE's Sorry for such a lengthy post, but I think I can get the best info off this forum for this topic better than anywhere esle.

Thanks again

[88pathoffroad]

You need to readjust the tie rod adjusters for better toe. The front tires should toe in towards each other very slightly when you're done.