terra88 Posted March 26, 2007 Share Posted March 26, 2007 Hey all, just fitted a custom top mount air/air cooler to replace the dodgy water/air setup that was on my rig and just wondering who out there has played with boost settings on the TD27 motors... I currently run 12 psi, a mate with a non intercooled terrano runs 13 psi but would like to know how much every one has run and was there any damage... was thinking of pushing 15 psi ...... Link to comment Share on other sites More sharing options...
sw Posted March 26, 2007 Share Posted March 26, 2007 (edited) do you have an exhaust temp gauge (pryo)? this is most important, as when exhaust gas temp hits a certain level it becomes damaging to the motor, that level depends on weather the probe its pre or post turbo. the other important thing is if your planning on or have already up'd the boost you need to up the fuel. both the td27 & td42 are very strong diesel motors, despite both being indirect inject, & if setup properly can handel big mods all day every day. lets see some pics of the cooler setup. btw air to water coolers arnt a bad thing, there actually very expensive, but to be worth while the 'barrel' need to be BIG as possible like 8x6 as a minimum Edited March 26, 2007 by sw Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now