Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

drop in filter vs cold air intake vs stock air box


Recommended Posts

I noticed a difference on a LT1 camaro I used to have with a cold air kit that took air from the front bumper.

 

On my old tacoma and current pathfinder I just droped in a K&N and drill a 4" hole in the front of the airbox and put in a deck plate from a marine suply store so it can be closed up if needed. I'm sure it flows very close to a expensive intake but there is very little HP and fuel economy gain.

 

I also have a Lexus SC400 and the stock airbox with holes and a few plates to block hot air from the engine gives more HP than the expensive cone filter kits.

Link to comment
Share on other sites

I noticed a difference on a LT1 camaro I used to have with a cold air kit that took air from the front bumper.

 

On my old tacoma and current pathfinder I just droped in a K&N and drill a 4" hole in the front of the airbox and put in a deck plate from a marine suply store so it can be closed up if needed. I'm sure it flows very close to a expensive intake but there is very little HP and fuel economy gain.

 

I also have a Lexus SC400 and the stock airbox with holes and a few plates to block hot air from the engine gives more HP than the expensive cone filter kits.

Funny you should mention cutting up the airbox. I just did that an hour ago. :D

 

Yes in the LT1 Camaro you need a CAI because the stock piping is so restrictive.

 

I need to design something for my '98 Maxima now.

Link to comment
Share on other sites

I went to Pep-Boys and bought a K&N look-a-like cone filter plus the 3" adapter plate, pulled the OEM air filter and box from my 2003 Pathfinder and put the look-a-like filter in. I have gone thru 3 tanks of gas since then and achieved a whopping 1.2mpg increase. Not too significant but, it beats the heck out of only 13mpg.

Link to comment
Share on other sites

Ya think? I can get 15 or just better on the road but in town sucks the big one. I really lost the mpg with the 33's I put on. Plus, the KMA front bumper is kinda heavy. Oh well, at least it ain't a grocery getter any more.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...