97SE Posted May 10, 2004 Share Posted May 10, 2004 I have a 97 SE, mostly stock...I noticed that the front seems to sit a little lower than the rear...is this the case with all stock Pathys? Link to comment Share on other sites More sharing options...
kmgar99 Posted May 10, 2004 Share Posted May 10, 2004 I think they came from the factory with a 1" higher rear end. Link to comment Share on other sites More sharing options...
88pathoffroad Posted May 10, 2004 Share Posted May 10, 2004 Yep, that's how they all sit. So do Chevys, Fords, and Dodges if you notice. That's so the rear will sit level with a load in it, if needed. Link to comment Share on other sites More sharing options...
97SE Posted May 12, 2004 Author Share Posted May 12, 2004 given that you carry a heavy load FAR less frequent than not, seems to me that they should raise the front an inch, as to make it level with the rear...then when you do carry a load, the rear drops at the current rate (now sitting slightly lower than the front) so nothing is lost... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now