packie88 Posted November 22, 2006 Share Posted November 22, 2006 okay so i just got my transmission replaced and the speedometer and odometer dont work. the cruise doesnt work either. supposdly the sensor is fine down in the tranny as i have checked the voltage on that. Also when i turn on the car the power/at button (one next to cruise control) flashes i think 3 to 4 times. oh btw i have a 94 se autotragic transmission Link to comment Share on other sites More sharing options...
88pathoffroad Posted November 22, 2006 Share Posted November 22, 2006 The revolution sensor isn't connected or working right, I would think. Check your TCU error codes, there's a stickied post in the Garage on how to do that. http://www.nissanpathfinders.net/forum/index.php?showtopic=1580 Link to comment Share on other sites More sharing options...
packie88 Posted November 22, 2006 Author Share Posted November 22, 2006 88 you rawesome thank you for that. anyway will check them. any1 know off the top of there head whether the 94 auto tcu s under the seat or in the rear Link to comment Share on other sites More sharing options...
88pathoffroad Posted November 22, 2006 Share Posted November 22, 2006 In the rear on the passenger side behind the wallpanel. Gold-anodized box with three mounting legs. Link to comment Share on other sites More sharing options...
packie88 Posted December 13, 2006 Author Share Posted December 13, 2006 okay so i replaced the revo sensor with the correct one and it still doesnt work. 88 would you say run that diagnostic, when we hooked up the diagnostics thing to see if its getting voltage it says we were. could my speedo just have gone out at the same time by accident or just like sucsk. or could ht eshop forgotten to reconnect something or fried a cable or something. not having a speedo or odometer really bothers me cause i wanted to see how far my car could go before it actually dies becase at somepoint the amount of mileage on your ccar becomes a bragging point Link to comment Share on other sites More sharing options...
88pathoffroad Posted December 14, 2006 Share Posted December 14, 2006 You may have to check the wiring for the rev sensor from the trans up. If they did something wrong it may have been pulled out of it's socket somewhere. It seriously just sounds like the rev sensor isn't giving any input to the ECU. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now