cdhicks99 Posted October 11, 2006 Share Posted October 11, 2006 I goofed up and shorted my foglight switch, now my pass. side headlight doesn't work. I have tried a good bulb and that doesn't fix it. What is the common factor between the two? What am I overlooking? Link to comment Share on other sites More sharing options...
unccpathfinder Posted October 11, 2006 Share Posted October 11, 2006 i dont think anything b/c i cut out the fogs in the 95 swap...and then spliced in high temp sockts...maybe its 2 coincidental events Link to comment Share on other sites More sharing options...
88pathoffroad Posted October 11, 2006 Share Posted October 11, 2006 Is it the Bosch-relayed fog light setup with the yellow, black, green and purple wiring? Cause those are totally separate from the headlights, as far as I've seen. Do your fogs turn off when you turn the high beams on? Link to comment Share on other sites More sharing options...
Simon Posted October 11, 2006 Share Posted October 11, 2006 Maybe a stupid question, but I'll ask anyways. Does your Pathy have daytime running lights? I have an issue with my DRL module that causes one of my headlights to stay off for a while, then I go give the pass. side fender a tap, and it comes on. I need to bypass that module. Just a thought anyways. Link to comment Share on other sites More sharing options...
cdhicks99 Posted October 11, 2006 Author Share Posted October 11, 2006 It does not have DRL, yes the fogs turned off w/ high beams, and I don't have the fogs on anymore nor will I be utilizing them again. Link to comment Share on other sites More sharing options...
88pathoffroad Posted October 12, 2006 Share Posted October 12, 2006 Sounds like there's a intertwined wire in the steering column or under the dash somewhere you need to fish out. D'oh. Link to comment Share on other sites More sharing options...
denisb Posted October 12, 2006 Share Posted October 12, 2006 I have an issue with my DRL module that causes one of my headlights to stay off for a while, then I go give the pass. side fender a tap, and it comes on. Hey Simon, my DNRL was doing the same thing and I took the module apart and fixed it. It was just a cold solder. I'm in Ontario for two weeks for work, too bad I'm spending the weekend in Windsor and not Mississauga like I usually do, you could have brought it to our shop and I could've taken a look at it for you. Maybe next time I'm down I can give you a call and take a look at it. Denis Link to comment Share on other sites More sharing options...
cdhicks99 Posted October 12, 2006 Author Share Posted October 12, 2006 I just realized that my hi-beam indicator doesn't work either :oops: Link to comment Share on other sites More sharing options...
denisb Posted October 12, 2006 Share Posted October 12, 2006 You did check the fuse right? I don't think both headlights are on the same fuse. Denis Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now