Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

BUMPER MESURMENTS

SUCK CREEK OFFROAD

By SUCK CREEK OFFROAD,
in General Forums

 Share

Recommended Posts

Slick NPORA Old-Timer

Slick

Posted
Posted (edited)
no bumper and im at work fabing one up

ah ah! fab me one up n i'll give you the measurements.. hehehe.... gimme a bit n i can get you the measurements ;)

 

oh yeah. you REALLY don't want to use the stock mounts anyway.... they are uber flimsy

Edited by Slick
Link to comment
Share on other sites
Precise1 NPORA Old-Timer

Precise1

Posted
Posted

The inside dimension of where the bumper bends is 60", that leaves about 3/4" gap per side. The bumper L brackets are 29" apart (inside dim) with the bolt spacing at 32" and 38" apart. That should give you what need.

I guessing this bumper is mainly for cosmetics, as Slick pointed out, the mounting brackets are pretty weak.

 

B

Link to comment
Share on other sites
SUCK CREEK OFFROAD
NPORA Newbie

SUCK CREEK OFFROAD

Posted
  • Author
Posted

thanks for the help. Ive been waiting all morning to get these measurments.Ive got an 87 pathfinder with good bumpers, just fabing up some off road bumper. Also if any body knows were i can get a 3.0 engine in good shape let me know.Mine has a spun bearing.Mine is the throttle body type not fuelinjection and does any one know what year models will enterchange with this one. Thanks again.

Link to comment
Share on other sites
Slick NPORA Old-Timer

Slick

Posted
Posted

your block is the same.. it's the intake that is different and wiring. if you can find a good VG30 block then you're in luck. that's 87-95 that share the same block. in 90 they started the VG30E's ;)

Link to comment
Share on other sites
Precise1 NPORA Old-Timer

Precise1

Posted
Posted
just fabing up some off road bumper

 

In that case, I'd build off of the two holes (per side) in the frame horns underneath used for grill guards !! If you want I can give you that info also, the sun is comming out... :D

 

Slick is basically right. I believe there is a little bit of difference (a tapped hole or two) but basically interchangable. lgranch might have one. Try looking through the parts for sale section or posting in the parts wanted section. Make sure to state where you are.

 

B

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...