Search the Community
Showing results for tags 'shocks'.
Found 2 results
Bilstein 5165 shock help
Xander386 posted a topic in 96-2004 R50 PathfindersI've been researching what shocks to get for my 4" lifted QX4 and I've settled on the 5165 but I'm not sure what bushings i need to fit into it. I read in some posts that it is a necessary step. And its understandable of course since the bushings are unsupported sizes for the r50. Is there a part number anyone could provide me for 5/8 bushings that fit the 5165 25-261400's? I saw that Jax99 ran that model. Also are there any inconveniences or tradeoffs anyone experiences from running the 5165s with the external reservoir? Things like whether or not the tube rubs the tire. My front end is spacer lifted 2.5" and my rear has LR 9448/9449 coils providing 4" of lift. I had looked at the 5165 25-187748 because it has a 17.93" compressed length which is very close to some 5125's (33-185569) I've seen some people running that have a 17.91" compressed length (with 11.8" travel). However the 25-187748 5165 has 17.93" compressed length AND 13.1" of travel. Which is quite an upgrade. Not to mention both of these shocks use 5/8 bushings for both top and bottom. Is there something I'm missing on why people aren't using the 25-187748 5165's? I saw one or two posts about people using the 25-261400's. Those come stock with 12mm eyes. To me at least it doesn't quite add up on why people would buy shocks that have incorrectly sized bushings that they have to switch, over just getting a model that has 5/8 eyes to start that, (to my knowledge) work on the r50 out of the box. But there may be something I'm not aware of. The way I see it, the 33-185569's seem objectively better due to the higher travel. And the fact that it has the same mounting length as other shocks I've seen r50 owners run means i know that the length is supported. And the 5/8 fitting seems perfect as I wouldn't have to switch the eye out. This is the parts+size chart I used - https://www.shockwarehouse.com/pages/bilstein-b8-series-measurements Sorry if this is a big information dump and a lot to ask but any info helps. I appreciate anything. Thanks in advance
Suspension options AUS R50 pathfinder
starke_arbor posted a topic in Australia/New ZealandHi there, Anyone out there with a good knowledge of the suspension options available in Australia for the R50? Both for lifts and OE height upgrades? The common wisdom on NPORA seems to be AC, ARB and land rover rear springs if you’re real nifty. From what I’ve seen the market is pretty different over here (tough dog, EFS, dobinsons even etc.), and it would be great if someone with a some experience could summarise what they know in this thread?