Jump to content

JonesyUSN

Members
  • Posts

    62
  • Joined

  • Last visited

Everything posted by JonesyUSN

  1. the dealership i worked at used red grease to pack bearings and cv boots.. most likely where it comes from
  2. my truck did i just ran a chemical through for carbon and it cleared it up a little.. also try using a higher octane fuel.. that helped mine as well.. but if it is a carbon buildup problem using a higher octane will build up carbon faster... but i would rather do the carbon clean kit once a month rather then use low octane and have it there all the time.. i didnt bother reading all the entries so sorry if im repeating someone.. also my engine made the noise at about 13-1400 till about 3200 its almost a knocking but not quite.. also is it worse or louder when going uphill.. if you have a manual just throw into 3rd.. and shift at a higher rpm.. after about a month or so of shifting at higher rpms it should spit out some of the carbon.. again sorry if i am repeating someone
  3. i had that noise and a week later my assender went out
  4. so if i were to pay someone to do an sas what am i looking at shelling out.. and what axle would be good to use.. i notice a lot of jgc and f100 parts get used.. would i go that same route... i have access to lots of f100s back in dayton ohio.. and probably lots of jgc's .. right now im in chicago so im sure i could find anything i need parts wise
  5. so right now im on naval base in chicago going to "A" school.. but live in dayton ohio.. so where are my muddin buddies.. that and i cant find any legal trails around here.. its really pissin me off.. ill be home at the end of september so if there are any of you in or near dayton ohio that wanna do a run it would be great... keep in my mind my truck is stock.. but its 90% driver 10% truck anyway.. so i should be alright.. haha.. lemme know whats up.. ill have my truck here in chicago with a few weeks... and will be available for trail runs within a 75 mile radius of great lakes naval training center.. or at least something close to 75 miles.. so lemme know.. i need a few good trail runs before i get to my first duty station.. hoorah navy.. !!!!!!!!!!!!! -PS- there really needs to be a sailor smiley face.. see ya
  6. few ?'s for you.. what is sas.. and ive heard of some people just geting calmini t bars. are they better.. a technician at my shop told me if you crank the t bars it gives you lift.. do the cals give you more or what? to do a body lift myself will i need a hydraulic lift like the ones at a shop. or will something simple like a couple high jacks or whatever theyre called work? ill be going home for the weekend to get my truck and i want to install a lift while im there.. im not too experienced so i dont know if i could do it in one day.. i have to be back here at the naval station by sunday night so i was thinkin of working on it all saturday.. what are some of the big bumps in the road you run into while installing body lift or suspension.. that way i can be better pepared when it happens.? thanks
  7. i didnt bother to read all entries... but in reguards to disconneecting the factory amps... i did not.. i have a 92 se i put a cheap pioneer deck in.. i have two 6 polk 2 ways and 2 6x9 polk 3 ways. i assume the factory amp is still running though... i have a rockford 500 running one kicker comp vr 12.. and it pounds hard.. so hard in fact ive had to put my rear view mirror on several times.. now im to the point that i want another amp for my highs because i am in the process of cutting out the rear doors for some 8 inch subs and 4 tweeters in the corners of the cab..ill let you know how it goes
  8. i had a topic in here earlier and only got a couple responses.. i have a 92 se with the blue vinyl. i have searched ebay and even a few random search engines.. nothing in my county has a large stock of pathys junkyard wise.. i cant get it from the dealer i used to work for.. anybody know of any junkyards that might have it.. that would be outstanding.. or maybe even a company to get a hold of.. thanks Jonesy
  9. so on a 92 se you dont have to cut down tie rods... ? i want the trailmaster 4" is it hard to do by yourself.. all i have is your standard jacks.. and jackstands.. thanks for the help.....
  10. its from a 92 se... the whole thing...
  11. ive looked all over internet including ebay and could not find a center console please someone help me out.. color is the blue... but any color will work.. please help my console is jacked up thanks Jonesy
×
×
  • Create New...