Nissyota88
-
Posts
801 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Nissyota88
-
-
DAYUMMMM!!!
-
dude............Sweeeet....
-
no, not at all........ (that was taken 4 days after i got it) the red lookin "dots" are little hearts
lol, a skunk is a cat with diffrent markings
-
my current one
You like skunks much?
-
-
-
-
did you install new a-arms?
if not, then don't mess with your suspension until you've got the right parts and go get it aligned.
snot yet...
Someone buy my ipod so i can get the AARMSQ!!!! or my hookah -
After i cranked up the tbars, it must have settled in... mine leans gnarly to the right... but i wont beable to crank anymore as im out of thread on the bolt... Reindex time?
-
Pshh.. "i drove down that road on saturday"
http://seattlepi.nwsource.com/local/208035_bodyfound15.html
My house old house where i was living then.. is in the blue.. her body found in the red...
And the green line was the road i always walked with my sisters to the ocean while she was missing...
-
could a belt make that noise?
-
That was on Les's truck. He has a one-off steering setup with Heims and spherical bearings. My steering was from L&P when they were in business. Hoohaa makes a damn fine centerlink replacement just like the L&P guys used to make, get in touch with him for more on that.
who les?
-
they did not belive in razors back then...
i dont think thats the actual one
i think its just some vintage porn -
I actually had a link forwarded tome, but if want to PMme this one thewife & I willcheck it out as well... purely from an academic point of view...you know like research & what not...
i wanna see her nudie
Like what you said... educational reasearch.. -
er... thats just reindexing tbars.. im talking about this
-
you have a write up on how you beefed up your front end?
-
carb cleaner or acetone works wonders
(joke) -
WTF? Up... down... pretty straight forward, right?
She prefers *up*..... well, that's just my guess.....
my pw dont work... the cable things inside it snapped and all thats holding em up is a piece of wood, sooooo... everytime i have to put them up, i have to take off the door cover.. thats why im going to just bedline it
-
i got smitty built rock sliders, and was gonna put on that same exact bumper on my old yota... you can see it on the groudn in front of the truck
-
sounds familiar... and mine was a shot injector.....
if it was a shot injector why woudl it bog? it would jsut be running on 5cyl... and just have loss of power, not cut out all power and kill the thing?
-
Alabama accent?
-
wasnt she found with a condom in her eyelid when she was found dead?
-
*points*
*laughs*
Gonna be 21°C here today... Sunny & warm.
I understand Eh... you just go inside you warm lil Hoause, and stop talking Aboot it
-
My 87 had that problem. Ends up it was the contacts in the ignition switch. If you pull the cover off the steering column you'll see a round switch with five (I think) wires behind the ignition lock cylinder. I think its the two top ones that you need to check. One is 12v from the battery and the other carries the voltage to the starter solenoid. The contacts inside the switch were worn out and would only pass 8.5 or 9 volts sometimes, not enough for the starter circuit to do its job. Drove me nuts since I had rebuilt the starter, replaced the wiring, relay, solenoid, etc. and it would still happen intermittently.
doesnt all the starter need like.. 9.6?
Damn canadians and your "Snow drafts"
in Off-Topic
Posted
¦ ç °?“‘á ß ¶ ™ ä ½ † Ú Ê š
Man... i can do that all day...