Jump to content

Nissyota88

Members
 View Profile  See their activity

  • Posts

    801

  • Joined

  • Last visited

 Content Type 

Posts posted by Nissyota88

    BZ Please...

    in Off-Topic

    Posted

    lighten up guys, your just jealous because you drive a 4dr.

     

    Really though - I'm sure NissYoto does have benjamin's falling out his pockets. He's off to a great start, but 35's and custom driveshafts cost money!

     

    Give it some time!

     

    it cost me like... 700.00 after all of that, if that much

    Also i work at mcyd's theres no benjamins here

    Also i have the blocks to level out the front, my rear springs are pretty much flat cause they are the 63"s and alot of people tha run the 63"s usually run blocks, good flex

    JGC lift

    in The Garage

    Posted

    i have acces to free v6 springs..i ll haev to pay for eth v8 springs...im thinking ill go with the v6 for now and then upgrade soon after

    Umm... then your pretty much using the same springs that are in the rear of your pathy right now.. i have some v8 ones if your lookin for some

    BZ Please...

    in Off-Topic

    Posted

    OMG, it's on a rock! Does it have a front drive shaft?

     

    I thought only children ran ifs? Its time to grow up, the fact that you pretty much have 2 completely stock paths. I mean im younger then you but... YOUR @!*%S WEAK

    This brings tears to my eyes

    in General Forums

    Posted

    I still give you tons of props on your rig cause you did it. Balls up, if it ain't your cup of tea, move on. But 16mpg? WTF are you smoking down there, T.O.M.? ;) I'm on mild lift, stock drivetrain, 31x12.5 and I'm doing fukin cartwheels at the gas pump if I can even approach 16mpg and beat 250 miles per tank. I call B.S.

    swear dude, its alot of unsprung weight also

    next fill up i will take some pictures and show you

    This brings tears to my eyes

    in General Forums

    Posted

    Exactly, yes I dont have 1-tons under my ride, but you know what I dont want or need them, and I think if you were to ask your self missy, you dont need them either. If I recall correctly this all started as whos got a bigger d!ck contest between your friends and you. I take pride in my new pathy and I took pride in my old pathy. When I look at the "work" that youve done to yours I dont see to much pride, all I see is "Ohh chit look what I can waste my money on, and have the bigger d!ck" ohh I meant truck.

    Id like to see what kind of MPG you get out of yours, missy. I currently get 20 city 22 highway, I have more power than you do and you know what when it comes time to sell mine If i ever choose to do so, I will get more out of mine than you will, granted it is newer. Have you ever thought about who would buy yours, or how long its going to last in its current condition?

     

    Ohh well I guess I can chalk it up to you being young and not realizing yet that nobody really cares what you drive, what size your axles are, what size your tires are, what can I do next to blow hard earned money on something that I really dont need and if they do thats not the kind of person that I personlly would want to hang out with.

     

    ha... i bet you if we changed up i could pull you if we both put it in 4. Dude... i still still make them peel out, i get about 16 miles to the gallon but whatever .... can you run over cars?

     

     

     

    Oh and redfinder... stfu

    This brings tears to my eyes

    in General Forums

    Posted

    Can I get in on this action?

     

    :stickwack:

     

    Dude how would you feel if you worked your ass off to make your truck the way you wanted and then suddenly it was taken away from you. :stickwack:

     

    Well i guess YOU would actually have to work on YOUR truck to know how that feels?

    Camaro DriveShaft on a Pathy?

    in 86.5-89 WD21 Pathfinders

    Posted

    Thanks, I guess I was visualizing it backwards.

     

    edit:

    Also If anyone wants a used cevy 10-bolt w/ 3.43 gears(IIRC)PM me for details

     

    Your pretty much just putting on an aluminum shaft... whats the point? you need the nissan flange and the nissan yolk slip other then that your fskcked and if not more worse... go ahead and try to find someone that wants to weld the aluminum... for cheap :shiftyeyes:

    This brings tears to my eyes

    in General Forums

    Posted

    As some of you know I totalled my old Pathfinder about 5 months ago when I hit a patch of ice on my way to work.

     

     

     

    This brings tear to my eyes when I think about how much time, blood, sweat, and money I put in to her to make her look like this

     

    100_1538.jpg

     

    Now she looks like this

     

    CSUTKE2.jpg

     

    Blood sweat and tears into that? WTF did you do to it? put on different tires and a bugsheild... ohhhh shiiittt :shiftyeyes:

     

    Hey atleast it died next to a first gen yota... aint that bad :tonguefinger:

    Engine fan stays on

    in The Garage

    Posted

    Alrighty well it sounds like the fan/clutch will get replaced asap then. Should be pretty straightforward, yes? Rad out, fan shroud, unbolt the fan and get to the clutch itself? I'll look in my manual and figure it out. Thanks everyone.

     

    Or do I switch to an e-fan... hmmmm.... With the fan going all the time I've really noticed a loss in power. Kinda sucks as I can't fix 'er right now. But I'll get on it when I can.

    TANNNER!!! dude i put dana 60's under my pathfinder and i also moved down to california sorry for never meeting you bro :thumbsdown:

    Woops

    in Off-Topic

    Posted

    hey man, if you hit a pot hole and it started to chimmy, then i'd be checking your king pin bushings.

     

    a stearing stabilizer is nothign but a dampner.

    I don't run one on mine, don't need to.

     

    In the situation you discribed, it will not fix your problems.

     

    rebuild the king pins on your D60.

     

    I had to shim my axle and had no front shocks... i shimed my axle 6 deggrees and it doesnt do it anymore... :tonguefinger:

    Woops

    in Off-Topic

    Posted

    The reason he wrote off on the unsafe is because i hit a pothole right as he was pulling me over and its started to shimmy really bad

    Woops

    in Off-Topic

    Posted

    I got pulled over... worst thing is it started shimming cause i hit a pot hole as he was pulling me over. I need a steering stabilizer...

     

    Fix it tickets

    1. no mudflaps

    2. no left hand mirror

    3. Unsafe vehicle needs steering shock :shiftyeyes:

    InBev Buys Anheuser-Busch

    in Off-Topic

    Posted

    Yes...

    WTF??? $2 a beer for that swill?? I honestly think I would quit drinking beer!!!

     

    B

     

    I just got back from mexico and down there corona was 1.50-2.00 a bottle first time i had tecate also.. i liked it

    Me and my bud both drank a liter of jager between teh both of us, we were fskcin hammard on teh cruise ship.. i did karakokeeeeeee

    Nissan SAS update

    in The Garage

    Posted

    and nissyota im diggin your design haha. looks like the only difference is i cut out a 2"x2" square out of the inner ears so itd wrap around the crossmember for more weld area. if i remember right the holes were out 3" from the bottom of the tab? funny, even both have the mili wrapped front eye!

     

    I was cutting mine somewhere else and we did the cut out of a 2x2 but then i thought it would hit on my radiator. im bracing it so its no biggie

×
×
  • Create New...