fleurys
-
Posts
2,171 -
Joined
-
Last visited
-
Days Won
49
Content Type
Profiles
Forums
Calendar
Posts posted by fleurys
-
-
Welcome !
-
welcome
-
1
-
-
welcome
-
welcome !
-
Www.car-part.com. Is also a good site to find an engine near your location.
-
Hey Steve, if there's a spot left on the second order, shoot me a pm please, I'll jump in on this.
pm sent
-
1
-
-
welcome !
-
Any idea when second batch will be shipped out also thinking about purchasing this
Both batches will ship at mid september.. I'm fabricating 12 of them for the first shipment.
Envoyé de mon iPhone à l'aide de Tapatalk
-
For you truck's year, I only make rear suspension spacers.... 4x4design.com
S.
-
The last payment will need to be done when they are at the powder coating station (just before shipping). That would be in 1-1.5 week from now.When would expect a payment for the remaining amount? I'm really considering this, talk me into it.
-Kyle
-
ill be interested in the second batch!
Sent you 2 private messages... Shows as not read.. Let me know if you want to reserve your skidplate or not... Tks
S.
-
** Only 3 spots left for the 2 first batches. Shipping expected to be mid-september. Reserve you skidplate ! **
3 days left for the end of the pre-sale.
-
Or you could use a piece of tubing ( 1 foot or 2.) over your ratchet and give it a go..kind off like a cheater bar ... I thought you meant your drain bolt was stripped... Like it,s turning but not coming out...
-
personally, I would drill it out with progressively bigger drill bits... Start by punching a center point, then start with a small diameter drill bit like 1/8 or 3/16... drill at slow speed and clean up as you go.. The plug will be out in about an hour or so... Once you get near the size of the plug itself, you will be able to fish out the last bit and pieces of it....
Welding could cause you to crack your TC...This would be alot worst...
My opinion...
Good luck.
S.
-
welcome!
-
ill be interested in the second batch!
Please send me your infos at steve_fleury3-AT- yahoo.com
(name, shipping address, email address for paypal invoice and daytime phone number.)
Thanks.
S.
-
Put me down for one of these bad boys! Much needed. Thanks!
pm sent.
S.
-
Steve will correct me if I'm wrong but...A 1" front lift will get you two 1" spacers. A 2" lift will get you four 1" spacers.
That,s correct. For the r50, i make two models of front spacers and 2 models of rear spacers ( 1" and 1.5"). They are modular so you can mix and match the two and get the lift that is right for you... That,s unique on the market...for any lift manufacturer out there...
-
WE OFFICIALLY HAVE A NEW PRODUCT ! Places are still opened for the second batch.
The product will be officially added to the 4x4design catalog in September.
Thanks to everyone who made this possible !
S.
-
3
-
-
So if S4 is in, that makes only 1 more to go, correct? I've been going back and forth since you posted this up, I'll make a decision by the end of the weekend, but thinking it's likely.
Well, I have technically 6 people interested. Just waiting on the 6th to pay the deposit. If you want to come aboard, go ahead and i'll add your name for the second batch of skids..
s.
-
2
-
-
Can you pm me your paypal address again?
Sent from Tapatalk
Send me your info ( either in pm or at steve_fleury3-at-yahoo.com
( name, address and email address) , and i.ll send you a paypal invoice for the deposit.
Tks.
-
O.K. thanks Steve , I plan on keeping the 31"s on the stock steel rims and am planning on going with the 1" lift. I was pretty sure I'd need spacers or differant rims for 32"s because of how tight the 31's fit. Unless something goes wrong elsewhere I'll put in my order for 1" all around come spring. Is the skid plate plan going though, I haven't checked lately if you've got 6 yet?
No problem... For the skidplate, 4 confirmed out of 6
-
Depending on the backspace , you might have to install wheel spacers., but our test truck with the 2" lift all around ran 32"
-
No..it,s only here... The pre sales end on august 31 st... It,s not too late..
R50 Best Modifications; What Are Your Favorite Mods?
in 96-2004 R50 Pathfinders
Posted
I have to say the best mod I did on mine was when I installed arb lockers... this transformed my truck into a rock crawling fun festival.. It just put a smile on my face each time I was climbing some impossible stuff !...
Also, If I were you I would keep some money for skidplate LOL (Coming out officially next week)
S.