crazyhayseed
-
Posts
548 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by crazyhayseed
-
-
I missed this thread the first time around. I'm glad it came up again. Awesome build.
I especially loved the part where guys were talking @!*%, then you did it and they didn't have anything else to say. Freaking forums. You'd think folks would learn to STFU with the useless negativity and try to offer actual insight.
Way to prove'm wrong. Bad-ass truck. -
Ok 1st question what is the easiest way to get to the plug on the back driver's side
The easiest way to get to it is to take the plenum off.
-
This leads me to another thought... Whats the plan for when these new "pathfinder" owners start showing up on the forums looking for advice?
I'm all for trying to talk someone into lifting that Outback clone 12 inches and adding a snorkel, but has their been any serious discussion here? -
Its disgusting, but if you check your chassis codes, the X-Terra took over for the Pathfinder a long time ago.
I'm really surprised Nissan is still branding cars under this name. -
I recently ordered a Thrush muffler from Summit. The "Buy Now" price on their eBay store was exactly the same as their web store's after the "handling" fee.
Either way, they beat everyone else by at least $10.
There were no additional shipping charges and they had the part to me the next day.
Summit is freak'n awesome. -
-
but thats a BLACK power fist...
-
Everything about this thread makes me physically ill.
Its like watching a news story about advanced Alzheimer's immediately after grandpa has called you Billy for the 5th time in a row.
I know its inevitable, but i don't wanna see my truck go out like this.
I really need to find a Mexican frame... -
Don't let this detour you. If you genuinely want to do something different and are willing to take on the project, I'll happily cheer you on.
You're headed in the right direction as far as seeking information before starting, but you have a lot more homework to do. -
-
-
The FSM mentions D3 and D4, but if you can find an actual gear in there, you're a better man than I.
I pretty sure automatic transmissions are assembled and operated using black magic.
I'm willing to bet that if you take it apart, you'll only find a red candle floating in the center with a wick on either end... The length of the wick determines how much longer your tranny will work.-
1
-
-
If it comes out of an R50, I wouldn't think there would be much issue with mounting the motor. It should have the same mounts as a VG.
The tranny might be a trick. Do you know exactly which model it is? Is it full-time AWD or select 4WD? I don't think all wheel drive would be too practical in this situation.
Then, if it doesn't match the WD21's transmissions, you'll have to worry about drive lines... Custom-built may be necessary.
You'd be much better off if this motor would bolt-up to your existing gearbox.
Of course, even if the drive train swaps over, you still have to work out the wiring (an included engine harness probably won't be directly compatible with the chassis) and difference in fuel systems. Having the donor vehicle on hand would help,
All-in-all, it sounds like a nightmare. A time-consuming, cash-guzzling, ulcer-inducing nightmare.
It ought to be a blast!
Do yourself a favor and find the FSM for the R50 or E50 that the motor comes from and start comparing it to the WD21.-
1
-
-
Yep. That's how mine started. "OD" was goofing when I bought it. 2 weeks later I lost 3rd completely.
I proceeded to drive the truck daily on 2 gears for the next 4.5 years before it finally gave out (a few weeks ago).
Fun fact: 3500 RPM in 2nd gear equates to about 60 MPH on a level road. Push it past that and you'll never pass a gas station. -
As much as I'd like to sell them, knowing that they're hard to get now makes me want to keep them even more. Sorry.
They'll go on sooner or later. Hopefully later this year.
Hell, I don't blame you. Thanks for the measurements.
Those are NOT 2.5" collectors as we were lead to believe. Kinda makes a monkey of the 2.5" Thrush muffler I'd planed on using.
Curses! Foiled again. I guess I'll have to use a set of disposable Pace Makers until something better comes along.
-
Well, the first one posted is left hand drive...
It also has California plates...
Well I'll be damned. That must be the option that makes it a $100 model.
-
^ This.
-
I'm building one at the moment. I have the undercarriage complete. Need to order correct paint to match mine to continue. Will also do the wheels black I think.
Nice weathering!
I've seen these all over ebay, but they're all Japanese. I'd hate to have to kit-bash the wheel onto the correct side.
-
I hate to say it, but I still haven't put mine in yet. I can take some pics and measurements later if you want.
That'd be great! Tho, shame on you for sitting on them for 3 years.
I still can't find a set. OBX is notorious for bad customer care, so I doubt I'm gonna hear back from them about whether or not they're still in production (I've sent 3 emails).
HEY! If you decide you're not gonna use yours, I know a guy who's truck is stuck in the garage and willing to pay a bit above retail to get his hands on some in a hurry.
-
I have some very very minor corrosion starting in a couple spots just on the surface of the welds. That's after almost 3 years of mud, abuse, rivers, ocean beaches, you name it. I think they are holding up well. I only paid 100 after shipping too a few years ago.
Thats good to hear.
I'm having trouble finding a set now. I ordered from Racing-Parts Depot, but received a refund two days later with no reason mentioned. No one answered when I called them about it.
I just talked to a salesman at ERZ Performance who says the part is back-ordered indefinitely. He recommends I try back next month....
Can anyone suggest a retailer?
-
I think we can restore that car. The frame looks solid.
-
-
I just installed this one in pretty-much the same fashion (not my pic).
Fluidyne CR-10029-MC-BRB. It's big, but it fits well in front of the A/C condenser.
I got it for around $50 (shipped) on eBay. -
I'm more concerned about what's going on behind the obviously missing headlight and marker, dude.
That's looks pretty rough... and I say that with this in mind:
Hood vents
in Solid Axle Swaps, Hardcore Custom Fab
Posted
Your wish is granted...
http://www.up22.com/Nissan.htm