[Lumens]

Love the switch cover!

[Z24 twin spark distributor]

Different setup, and they use a different length distributor drive.

I actually ran a twin spark engine with a single spark dizzy for a decade, just ran the leads to the drivers (RHD) side set of plugs. Had to change the oil pump/distributor drive.

Raised plenty of questions when I lifted the hood haha!

[89 pathy]

I ran the Superlift setup with about 2" of torsion crank and found it worked really well. I sold the car but have another '87 I plan on setting up the same. 
 

[New Member]

Hi All,

My name is Pete and I am from Victoria in Australia

Here's My Old truck - 86 with a Z24. I had this thing for 11 trouble free years and I don't know what made me sell it but the second it drove off I regretted it. 

Fast forward a few years and it just came over me that I had to have another one. 

A few months of shopping I found this old girl and picked it up for a song. An '86 like my old one. 

The thing that sold me on this particular car were the condition of the body and the interior. Anyone into these cars will know how hard it is to find nice trim bits. 

And here is the only rust in the car, being a dry inland car

After picking it up I got 50 km before it started overheating. 
Stopped, cooled it down, topped off the water and put a new radiator cap on, got another 10km and it overheated again. .. And again. 

Luckily we have roadside assist and they covered the tow (180km).

First steps are to address the overheating issue. Will start with new waterpump, radiator and thermostat. If that doesn't fix it I still have a spare engine from my old pathy. 

Then I'll fit a 32/36 Weber, Extractors, remove the LP Gas Conversion.
I'd like to find a set of factory wheelarch flares and do a lift and fit 31s. 

I'll be sure to update on progress but will be slow as the car is kept on a rural property I own, so I'll only get to work on it a couple of times a month. 

If you made it this far, thanks for reading!

Keep the shiny side up!

Peter