92SEPathFindr

Hi friends, I'm new to Pathfinders and hope to get a bit of help. My radiator fluid/coolant is rusty colored. I want to flush the system well a few times with some of the flush products before I refill it with antifreeze & distilled h2o. In 2011 there was quite a bit of work done including engine, water pump, all hoses, clutch, and more and I assume the thermostat. I bought a Prestone Flush kit which includes the Tee fitting. I don't have a FSM yet and there is a lot of different advice about how best to do this and not necessarily for my year Pathfinder. Any help? Thanks! I have a photo of the heater hoses coming through the firewall and I want to find which one is the "heater inlet hose". My kit says to put the Tee in that hose. Cheers and thanks a lot. http://s304.photobucket.com/user/ut234/library/1992%20Pathfinder%20SE

Hello NPORA!! My name is Aaron and from a local original family/owner on Craigslist I just picked up my first Pathfinder, a 1992 SE 5-Speed Manual. Really excited about it and looking forward to doing preventive maintenance tasks to ensure, as best as I can, reliability. After looking over the truck carefully and a test drive, the PO showed me a folder with receipts of work paid for by them and that really helped with my decision. In 2011 they replaced the engine at a shop (with warranty) with a low mileage Japanese engine and have put in many replacement parts at the time, hoses, water pump, clutch, flywheel, front & rear shocks, and more things also. The chassis has 158K miles. I have a question about flushing the cooling system properly. Cheers and thanks! Here's a link to photos: http://s304.photobucket.com/user/ut234/library/1992%20Pathfinder%20SE