MrSkaw

I want to replace the headlights and there do not seem to be any options. Wondering if anyone has done this modification to have one full lightfixture up fornt on each side. If not looking for a headlight fixture so I can HID's. Right now I have the big halogen bulb.

[/url]">http://http://s1072.photobucket.com/user/chadlist/media/Mobile%20Uploads/IMG_20150617_200645799_zpstav9bqpu.jpg.html'>

[/url]">http://http://s1072.photobucket.com/user/chadlist/media/Mobile%20Uploads/IMG_20150617_200618142_HDR_zpskawvdy5a.jpg.html'>

[/url]">http://http://s1072.photobucket.com/user/chadlist/media/Mobile%20Uploads/IMG_20150614_201046545_HDR_zpslaxpbprv.jpg.html'>

[/url]">http://http://s1072.photobucket.com/user/chadlist/media/Mobile%20Uploads/IMG_20150617_200717181_HDR_zpsmklp8iqo.jpg.html'>

">http://

Sent from my XT1254 using Tapatalk

Ill get some more pictures taken and get them posted. My wife said she lost me for awhile as I start this build.

Had some spelling issues on original entry. I have a calmin 3 in lift and put 2 inch spacers in the rear. I have the torsion bars re indexed and cranked a bit but seems to stop at a point. I think that I am level enough but was wondering about getting maybe bilstein shocks for the front if I wanted to gain another half inch to an inch. Ride seems a little stiff but the old coils and shocks were about shot.

I put a 3 in lift on 94 pathy with 2 inch spacers in the rear. When I tree indexed torsion bars and cranked them up I think I ran out of height with Camino front shocks. Is there larger shock to go with?

Lift on, Just need to crank torsion bars and get alignment. I have three inch lift on Steve's Pucks from 4x4design which gave me 5 inches of lift.

Tires and wheels in ( 32-11.5-15), calmini 3" lift arriving this week, two inch coil lift from 4x4 design. Ill replace cv axles while in there. Ill get pictures up for all to see.

Just placed order for 3" calmini lift and full steering upgrade. Would like to Upgrade lights to Bi HID

I will get ordering the Calmini 3" Lift and putting new wheels and tires. The back spacing on new 15x8 wheels is like (3.5). hoping that will work. Calmini recommended 5-51/2. I will be running 32x11.5-15. Going to give it a fresh tune up, replace valve cover gaskets and starting research with all your help on exhaust and intake mods.