Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

passengerpete

Members
 View Profile  See their activity

  • Posts

    57

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by passengerpete

  1. passengerpete
    ya can run a tx12 behind the auto with a few mods not much tho. I used the hole patrol gearbox in mine lots of messing about tho
  2. passengerpete
    I used Nissan gq patrol axles as had then sitting around. just mod a tx12 to ya auto.
  3. passengerpete
    if ya going to sas it mate how much can ya do your self ? because paying for some custom fab is not cheep. may cost $ 3000-4000 I did mine cost $800
  4. passengerpete
    its a rubber moulding that's screwed or pop riveted on . ya buy it off a roll by the meter. $50nz. dose the hole truck it comes in 50mm or 75mm wide cheers.
  5. passengerpete
    only 33'' soon to be 35'' cheers
  6. passengerpete
    na mate ya wont need to, ya intercooler is only cooling the air, but by turning up the fuel and boost then get it tuned the old girl will take off. I run mine on 18psi for four years no problems
  7. passengerpete
  8. passengerpete
    I go two on mine
  9. passengerpete
    its about a 1992. there are two types for the same shape the Early one 1989 ish had more curved shape and the face lift 1992 ish was squired off.
  10. passengerpete
  11. passengerpete
  12. passengerpete
    and it works really well. on the motorway the the temp gauge sits lower then it use to, the vent sits above and slightly back of radiator. my theory on why its works is that the air going over the vent is high pressure, and the hot air rising out of the vent is low pressure thus creating a vacuum sucking the hot air out. i could be wrong but what eva is going on has definitely lowed the engine bay temps.
  13. passengerpete
    i put a Subaru scoop on backwards for my vent.
  14. passengerpete
  15. passengerpete
  16. passengerpete
    sure
  17. passengerpete
    sure no problem.
  18. passengerpete
    cheers.
  19. passengerpete
    thanks mate and yes tyres are km2s and custom bumper/winch mount
  20. passengerpete
    truck finished yay
  21. passengerpete
    http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=18&t=27407 i have a build page on anouther site,
  22. passengerpete
    hi mate the y60 is about 100mm to wide , but i did not bother shorten them. i will just buy some -offset rims to bring the track back in, don't forget you will need to change ya transfer case around to the other side. Meany ways of doing this. i just used the safari gearbox as well, just so i could use a mechanical winch.
  23. passengerpete
    yea it works. i have done it to my one.
  24. passengerpete
    i prefer the full chassis of the wd21 and the shape is to my liken more.
  25. passengerpete
    go patrol to keep all nissan. front and rear ratio both the same.
×
×
  • Create New...