PaMountianbiker

FITS IN THE GARAGE !!! WOOOOOOOOOOO HOOOOOOOOOO

skid plates then bumpers so I can use my new warn winch !!

Not sure yet but I do have cutting tools!!!!!!! LOL

No rubbing front or rear. They are stuffed in the rear though I'm not sure 3.75 back space will work just depends on the tire width . Mine are 12.50's on skinny rims working good so far

Flexing today 33x12.50x15 on 7 1/2" rims 4 1/4 backspacing

yes I replaced one a couple weeks ago and figured I would like to have both be new .Hopefully no problems there for a while.

13 hours

Those are 7 1/2 wide

The List as of now : Front SFD kit by Krypton Fab.; 2" ac lift coils; New cvs shafts from Napa; New Tierods; 1 1/2 " wheelspacers Stock pathfinder steel wheels from a WD 4 1/4 backspacing Rear 5.5" lift coils for WJ with pigtails cut off one side ; welded on spring holders on axle side ;Ford F250 stock shocks; Krypton track bar relocater Tires 33x12.50x15 on stock pathfinder wheels from WD with 4 1/4 back spacing 4.6 gear swap with LSD in rear Future New skid plates - Missing link - 35's - front ARB locker - New bumpers f/r with hitch mounts for my new Warn 9.5 winch.

I still have to swap rear 4.6's and work on alignment top of tires is leaning out farther than the bottom. I think it looks better now though as tall as my lifted F250 LOL]

finally done Having trouble with alignment

I should have it done sometime today!!!!!!

You all know what this means !!!!!

Looks like fun.

Looks like fun I can't wait to see some video's

mine were on closeout also said 5" on web site but had 5.5" on box looks like good height though ? When I get front done I will really know I am waiting on my 4.6's to come before I start front though. Should be here on Mon or Tues

Are you planning on making upper links adjustable also? So us with SFD could push our axle back to center with a longer drive shaft and maybe decrease the pinion angle

I don't know what rate they are or length but i got them from Iron rocks offroad. How did you cut the pig tail off ? Where? I cut right across from end my piece that was left looked like a G

Good to know . I was going to make my own when I put the front SFD in.

yes they are stock shocks from my F250(factory) . I used the weld on adapters for the springs.

Black ones are from F250 I had bilstens. I have 33's sitting in the garage.

Rear is done. I got another 3 inches of lift totaling about 6". I used WJ 5.5 lift springs ;Krypton drop bracket; ford F250 rear shocks;and extended brake line.

Took mine of when I put WJ lift springs on

Bobcat fixed starting to tear Pathy apart tonite!!! WOOOOOOO HOOOOOOOOO !!!!

Brag Brag Brag!!!!!!!!!!!!!!!!!!!!!