Inyourface1650
-
Posts
357 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Calendar
Posts posted by Inyourface1650
-
-
5.3 is a ls series..uses Coilover. But yes a Small block will fit.
-
Pathfinder owner's anonymous...
POA!
- 2
-
Dana44 wont cut it in the back with that thing.
I hope they also offer the 2.8.
offer the VQ40DIE, VK56DIE, (direct injection), 2.8L Diesel and 5.0 Litre Diesel - and they will have it covered....
-
'94 update - 215,000. Starting to burn oil now when I keep the revs up...aka always.
-
5L? I thought it was going to be a 2.8...However this will be a good size. Not a mountain of power like the HD's but PLENTY of what we would need to do with a half ton.
I think its gonna be sweeet!
-
$50 mounts from 4wheelparts store
SOLD. that was exactly the picture I needed to see. Just ordered it off Amazon - Also got a Jack Protector.
Thanks 5523!
- 1
-
4wheel drive hardware just might have what you are looking for.
product number h/ltm-700 comes in 1"- 2" mount or a 2"- 3" mount.
I saw these, I but I think they will make the jack stick out too far. I'm trying to decide if above the spare tire like this: - or if I mount it at an angle across the carrier like this: \ or /. so many options!
-
http://www.trail-gear.com/hi-lift-jack-mount
I used those. Took my truck down to a local fab shop (before the tranny died) and had them welded to the top tube of my tire carrier for the cost of a 12pk of beer.
I really like these. Do you have the welded horizontally or vertically? (I guess...the bolts horizontally along the rail or vertically).
-
I think I'm just going to do the sport rack, its a few more dollars then the other one, but i know its going to fit. probably order it next week...
-
The A-arm looks toast just from the rust...
- 2
-
When you've maxed out your lift options and a "Donk" Impala still has more ground clearance.
33x12.5x15 - 3 inch suspension, 2 inch body.
- 7
-
installed the harness and it runs now with out stalling out at idle but....still idles around 500-600 when its at operating temp is that ok? Does it seem like that normal or should it be around 750rpm? also seems kind of boggy yet...could be my clutch slipping or something else..i cant get it to run any codes but i know my o2 is old and my clutch is about shot.
I know there was a Nissan TSB and a harness was developed. Does anyone have a link to it or where I Can get it? I need one!
Mike
-
Does the power light flash when it does it?
-
I found the sport rack on Amazon, and that looks like it would work:
Note it has the BIG HOLE In the mounting plate for the tire support our tire gates have.
I am also looking at this one:
http://www.amazon.com/Surco-BT300-Spare-Tire-Rack/dp/B00029KBF8/ref=cm_cr_pr_product_top
But Cannot find a picture of the mounting plate for the life of me....
-
9. Rear tires rub the paint off and I've had to spray paint. FIrst winter in the snow, still looks good!
-
Hey guys,
Who has em? My highlift kicked around in the cargo bay for 3 years and I got sick of it. I have it currently wedged between the spare tire and tiregate. That seems to work well on the road, but I have my doubts offroad. THis really only works because someone stole my nice spare, so I just have a stocker 31 on the back for now...
I also have cross bars for my roof rack, but as I mount kayaks up there and such, there's no room up there.
NOTE: I do not have a welder. So I'm looking for a cheap and practical way to attach it to the tiregate I guess.
I saw some of these: Hi-Lift Jack TM-700 1"-2" Adjustable Tube Mount, on a Jeep roll cage and they looked great! but WAAAAAAAAAAAAAY To big for the tiny tubes on the back of our Tiregates..
Thanks!
MIke
-
btw: you wont break anything with stock tires. Even with the full skinny pedal treatment. R200A and 180lbft...you'll be fine...
I lose zero sleep over it and I have 33's. They used the same exact diff for the Supercharged and VQ35 trucks....
-
-
When alignment shops tell you to go away.
B
^this has happened to me. "Replace your entire steering system, then come see us"
When that 9000lb contractor van beats you off the line....
- 1
-
Bought Kayak Racks for it!
-
What is the Group size on the batteries? two group 24s? I've got an Group 25 in mine IIRC...it hangs over about 1/2 inch on the side...
-
I think the Rear motors/regulators are the same as the front - by which i mean its the same part number, front or back door.
-
no 33x12.5x15 and they are retreads...oh well...
-
Looking for wheeling buddies!
We've been out 3 of the last 5 weekends - Did Bill Moore Lake, Another small lake (forgot the name) and several trails near Idaho Springs.
Also - anyone got a welder? Mines in PHX, AZ.
Pathfinder got totalled - going to be selling all my off-road parts
in 96-2004 R50 Pathfinders
Posted
DOH! Im in Denver and the Goodies are awesome, just for the wrong truck