Kyle94
-
Posts
5,555 -
Joined
-
Last visited
-
Days Won
13
Content Type
Profiles
Forums
Calendar
Posts posted by Kyle94
-
-
For sure. Haha.
might have found an engine, trans, and 800mile clutch for $200... Still waiting for the guy to call or text me. Sentra group hookups... -
If I had the money id rather go sr... They end up I. Junkyards a lot in sentra. As Dennis said 5spd limited slip transmission. And over 130 hp. And only swapping parts.
-
True, just sucks, 12mpg is killing me lol. No matter how I drive pathy it's the sane I swear...
sentra would/should get 20-30 -
Might be a stupid question, since crank/rod wear issues. But I found an engine that has been outside and is supposedly ruined on one cylinder. Is it silly to think I could grab a couple pistons and put them on the rods in my current engine? Or the whole piston and rods in my engine? Trying to search around good not finding anything.
-
Lol. Custom maybe? Wonder what year. My 1991 xe speedo goes to 130 mph haha
-
Wd21s did come with black leather seats. I've seen them. But I think the dash and what not was still grey.
-
With an open spark plug hole mind you.
-
Engine is out... Sort of pain. But easy to remember. Lol.
The engine I was going to get got left out side in the rain...
-
Bad engine is almost out... Who of thought fwd was so much different? (Kidding... Kind of
) only worked on it for two hours. Thank you Nissan for the color coded connectors and clip type connectors. -
Sentra? Probably swapped or an sr20de or det. The SE-rs came with them. Some sentras were swapped.
-
Well good...
-
Haha. Excuses.
-
No. It's a first gen bronco....
And nothing yet. Going home to test the compression in a few.
-
Guy said it has no compression. Gonna check it later today. Also gonna pull the valve cover and check the springs and stuff. Then if all else fails the engine is out and I found one in town that's already pulled for $200. Just worried since I can't hear it run ha.
-
SOOOOOOOOO! I found an engine from a 1990 sentra... its a 1.6L, is it possible to swap all the efi stuff from my block to the carb'd block?? $100 is a steal if i can! And i get to hear it run!
-
Right on! haha. If i can't find one or don't like the look of it (i have to see one in person...) then i might take that one you have off your hands for the right price.
-
Yeah, i never play it and am never gonna get xbox live again. So i'll just throw it in.
SOme specs about it. 181k miles, power mirrors, rear defrost, a/c, cruise, spoiler, 5spd with a grabby clutch. HUGE sunpro tach.. haha.
-
Well it's home... had to slightly ride the clutch from a stop, and as you can imagine had trouble starting it to leave the guys house since #3 is dead and the battery was low. hook up a jump pack and on my way. even had a little fun on the way home.... burnout through first gear (accidental first time, next three times got to me
) and after 2k rpms it runs great. 75mph it stops gaining though. All in all, nice body, int a little dirty, engine might have a knock, and cyl 3 is dead. Came with the wheel key (forgot to ask, but found it when i got home!) starts on it's own now though. used about an 1/8th of a tank in 5-8 miles........ 
Here's video of the engine.
-
Eh. Never play the xbox anyway haha. I'll look more into the tach thing probably tonight and or tomorrow.
-
Right on. Looks about perfect size lol. Gonna check a few junk yards this weekend for a stock one then I'll let you know!
-
Got a picture? Might be interested if I can't find a factory one. If b13s cane with a stock one. Haven't looked into it much.
-
It's possible the hose was replaced and not stock equivalent maybe??
-
Lol, 1991 or 1992* if a mod could please edit my post two above.
-
I looked into a rebuild kit already. Just gonna find a known good engine and swap it. Tune up. Etc.
My Nissan addiction is growing! Nissan for life! :)
in Off-Topic
Posted
In the process of taking the head off until I got word of the $200 setup. No point if I can get that for $200