GrnMchn

FYI- They fit fine US WHEELS SERIES 84 15X8" 6x5.5 3.75"BS

I went with the 32's, I'll post some pics when I get everything on

I am ordering new tires this week and am either going to get some 32's or 33's both in a BFG AT. I don't plan on regearing for a few months, probably to some 4.6?'s. I am thinking the 33x10.5's will be easier on the tie rod ends which tend to go out on rack and peanut steering setups. So, what do you guys suggest? I have the AC lift with a 1 1/8" spacer up front and will make either fit with trimming and a hammer.

I will order a 15X8" 3.75BS steel wheel from summit and see if it it fits

Were the AR wheels aluminum or steel? I know you can fit aluminum wheels before steel cuz when they stamp the holes in the steelies there is a lip formed on the inside of the wheel. I might have to order one and see if it clears. Anyone Else????

Cool, I was just checking to make sure they didn't change the callipers when they switched to the 3.5L

So I have an 01' and will be putting the AC lift with a spacer on it. So I want to swap out the stock 16's for some steel 15's. I was planning on going with either the US series 84 or crager soft 8 both in a 15x8" with 3.75" BS and black. I saw that someone with an 01' "I think had done this" I just want to make sure the 15's will clear the callipers before I buy them. I don't remember the post where I saw it and don't feel like searching around for an hour. Any imput is good.

Sounds good just make sure it won't come off and it is sealed tight. The coolest thing is that it will make a wooshing sound whenever you give it gas. Take some pics