So yesterday I was cleaning up some switches for my cruise control and defogger (which both work now =) and finished up and put the dash back together, I had not even touched the spedo console. I start up the truck, and turn on the lights and now I have no spedo/tach/fuel/temp/cig lighter lights, but all hazard lights and blinker lights and others work perfectly, not even dim at all.
-Everything worked before I cleaned up the switches and took apart the bezel and steering wheel plastic.
-I replaced all the bulbs (larger size red/brick colored backing)
-checked the dimmer switch (and tore it apart and it was very clean, no bad connections i could see)
-check all fuses like 9 times, and checked all the connections behind the spedo cluster. Everything seems good, but no luck.
*I read there may be a ground behind the ash tray and looked for it but no luck*
Anything Im missing? Thanks in advance!