muddfildvaynes

I am keeping my front coils that I got with the suspension lift from 4x4parts.com because with the SFD you are just adding in strut spacers becuae they don't make bigger struts for the front...... So I dont see where getting new front coils is needed however if you wanted to make them stiffer?

Tell them you want the same springs that Terry Henry and Tyler Morgan from Pradolifts ordered which is springs made to stock pathfinder specs except the height is extended 5.5" and rated at 160lbs.

Just ordered my pair of springs, apparently you can't really get a discount unless you order 10+ of the same springs, I should be getting mine in a month, will let you know how they are.... I'm trying to round up all the pieces to my SFD like the rectangular tube, the plates to make the strut spacers, brake cables, need to get THE 4 link made, make my driveshaft longer, Ford F250 2wd rear shocks, nuts and bolts, steering linkage...... anyone have any ideas to locate some of these?

Nope I have the RS5000's

I tried gettign a quote and here is what I got out of it.... Hello Terry, No it does not. I would estimate shipping cost in the $30 to $40 range. I will not know the exact amount until the springs have been manufactured and weighted. Thank you Kevin ] From: terryhenryjr@aol.com [mailto:terryhenryjr@aol.com] Sent: Monday, January 18, 2010 10:55 AM To: info@coilsprings.com Subject: Re: Quote Request: terry henry Does that price include shipping? -----Original Message----- From: Coil Springs Info <info@coilsprings.com> To: terryhenryjr@aol.com Sent: Mon, Jan 18, 2010 11:48 am Subject: RE: Quote Request: terry henry Hello Terry, I apologize for the misunderstanding. When you said four, I thought you were meaning front and rear coils springs. Rear – coil springs - +6.00” lift & 160#/in spring rate. Pricing: 2 pair @ 248.40pr Thank you Kevin From: terryhenryjr@aol.com [mailto:terryhenryjr@aol.com] Sent: Monday, January 18, 2010 10:34 AM To: info@coilsprings.com Subject: Re: Quote Request: terry henry I do not need front springs, a friend of mine is doing the same lift and might need the same springs, so what is the price for 4 and what is the price for 2? The $298.60 does that include shipping and for both springs? -----Original Message----- From: Coil Springs Info <info@coilsprings.com> To: terryhenryjr@aol.com Sent: Mon, Jan 18, 2010 11:22 am Subject: RE: Quote Request: terry henry Hello Terry, 1999 Nissan Pathfinder Front – coil springs - +6.00” lift & ????#/in spring rate Pricing: estimate: $ 276.40 pr Rear – coil springs - +6.00” lift & 160#/in spring rate. Pricing: $ 268.20 pr What coil spring rate do you require for the front coils? Thank you and I await your response to proceed. Kevin Coil Spring Specialties From: terryhenryjr@aol.com [mailto:terryhenryjr@aol.com] Sent: Monday, January 18, 2010 10:12 AM To: info@coilsprings.com Subject: Re: Quote Request: terry henry This vehicle is my daily driver with a 2" suspension l;ift and 4" subframe drop so I need custom springs made, its not a rock crawler and it is a straight axle with a 4link rear. The $298.60 does that include shipping and for both springs? What kind of deal could I get if I ordered 4? -----Original Message----- From: Coil Springs Info <info@coilsprings.com> To: terryhenryjr@aol.com Sent: Mon, Jan 18, 2010 10:48 am Subject: RE: Quote Request: terry henry Hello Terry, 1999 Nissan Pathfinder Rear – coil springs - +6.00” lift & 160#/in spring rate. Pricing: $ 298.60 pr Is the vehicle being used as rock crawler? Is the rear suspension – straight axle on this vehicle? Thank you and I await your response to proceed. Kevin Coil Spring Specialties

I have a set of 31x10.5x15's and I had to do minor trimming to the inner fender and my bumper to make them fit, you might have to do a little trimming unless you have a suspension lift already......

I have the sway bar from my 99.5 pathy along with the mounts and nuts and bolts, I live in NH though so I don't know what the shipping would be..... PM me if your interested.

How much do I have to modify the spring perches to fit those springs and where can I find some instructions on doing so with pictures?

all I can find is front coils from a XJ, is this what you are talking about?

What kind of springs could I use instead of the spacers?

Would you still be willing to build another kit, and if so how much would it cost? Another question... do you have problems with the rear springs with the spacers? Did you have to use limiter straps? How is the flex?

4x4parts.com SKU: SPBDPKG4 is the lift I ordered

So I am new to the forum and love how you detailed the SFD, a couple questions.... Did you have to replace your 4 links? What about the brake lines and drive shaft? Lastly I have a friend who owns a CNC machine shop and is a certified welder who wants to help me make this lift, I was wondering if you have a file put together with all the specifications/pictures that you could email me at terryhenryjr@aol.com. You have a very nice looking truck.

The CV's are actually quite well, I replaced those about a year ago and the boots are holding up well, haven't put the manual hubs in yet but plan on it soon, my main thing right now is trying to get a SFD and a new 4 link thats extended to re center the tires, some skid plates and rocker guards and a winch..... I will put more pics up as I take them, anyone know the specifications on the SFD? My buddy owns a CNC machining company and is a certified welder; he could make it for me but I need to know the specifications....

99.5 pathy LE with 3" coil lift which for some reason I got 4.5" of lift out of...... I'm not complaining, trying to get together a SFD to do; it has 31x10.5x15 Goodyear M/S, Alpine IVA W205, infinity platinum speakers (highs, mids, lows, tweeters), two 12" Solo-Baric L7's, 4000 watt Leagcy amp with 0 gauge wiring, cb, brush guards....... it is a work in progress