NWT87PATHY
-
Posts
167 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Posts posted by NWT87PATHY
-
-
-
Tricked out nismo
-
91 short bed 4x4, 5.7 tbi 700r4
-
Body swap.
-
Ahh nice u retro'd the stock computer's from the chevy.
Should try something like mega squirt+mega shift to really unleash the beast!
Sent from my iPhone using Tapatalk
-
-
-
What are you using for computers?
Retro fit stock stuff or stand alone?
Sent from my iPhone using Tapatalk
-
-
-
6.0l's are part pigs.
How many miles are on it?
Does it have a EGR still?
Have the Heads been off yet?
if so Head studs or Bolts?
what kind of programer is it running?
Ive been working on these for years, IMO the most solid truck money can buy. The engines are good if upgrade them properly. 05 means u have a Torque Shift trans so its more or less bullet proof.
Sent from my iPhone using Tapatalk
-
-
Better to build then to find aftermarket bolt-on. IMO
-
I got 04 gmc truck mats in mine they fit decently and they got checker plate look!
Sent from my iPhone using Tapatalk
-
Treat it like a tbi maybe you will have better luck. Make sure u have iac and your injectors are spraying properly, perhaps give it a tune up and make sure your fuel filter flow is going the right way
Sent from my iPhone using Tapatalk
-
You bet their is! Expect to break Off a few of the screws and more then likely do some rust repair around the hole.
-
You bet their is! Expect to break Off a few of the screws and more then likely do some rust repair around the hole.
-
you bet!
i did the front crank seal in my 87 3l. while i had it apart i put new cam seals, water pump, timing belt and thermostat.
this 07 that needs a timing chain replacement has around 180k, so just the timing kit and be done with it?
-
What else should be changed while i have it apart?
-
Whats up with the blue dash!!?? Lol
-
my bad i dident see the whole post on my phone. Only GL-4 goes in the 5speed's
-
!!! GL-4 !!!
-
Not lambo doors, but still pimpin
Got rid of the ducting..
Eye balled the parts.hmmmm..
Dosent fit..Hack chop cut.
Allmost their!
Little bit of some wiring.. And a coffee
-
NWT= North West Territories, is were i'm from & Inuvik is were i tear it up!
87= Year of the Finder, Actually a 87/89/94 now..
Pathy= The Whole reason for being here!
pathfinderado
in Solid Axle Swaps, Hardcore Custom Fab
Posted
Hell yah, bowtie running gear just can't be beat!. Plus the iffy front end will maintain stockish appearance. Still up in the air if I should put a 4 link in DA back or keep her on the leafs