Tungsten

next project....push button start!

why isnt straight wiring the MAF sensor to the ECU working??

so those screws, in the inner step thingy next to seats on the floor holding the carpet down, are completely false and useless or are my threads striped because i tried using a screw driver and it did nothing.

so those screws, in the inner step thingy next to seats on the floor holding the carpet down, are completely false and useless or are my threads striped because i tried using a screw driver and it did nothing.

so those screws, in the inner step thingy next to seats on the floor holding the carpet down, are completely false and useless or are my threads striped because i tried using a screw driver and it did nothing.

stupid CEL is seriously stressing me out.. about to go completely insane...

is it wrong to lower a pathy?

why is that after i change motor oil it starts slipping in gear alot more

New MAF sensor = big improvement in bottom end

is it wrong to lower a pathy?

New MAF sensor = big improvement in bottom end

is it wrong to lower a pathy?

total epicness took the egr valve off my R50 and it runs like a champ!!

The older wd21's are smaller arent they. I saw one today and it was tiny as HELL

The older wd21's are smaller arent they. I saw one today and it was tiny as HELL

blew a hole thru my power steering line

Finally.. No more CEL!!!

went wheeling yesterday: http://ruggedrocksoffroad.com/gallery/v/big-bear-holcomb-creek-4x4-aug-28-11/

i hate you too, tension rod. -.-

I <3 My Pathfinder!

Dam it someone reveresed intomy rear door today not happy

damn floor pan is giving me the hot foot

Help! ECM reading code 12 (MAF sensor) I cleaned with no results so I orderd one of ebay and replaced it with some, but little results...new plugs didn't help either...still code 12.Is there anything else I can try? I'm stumped!!!!

new gun or new tv?

new gun or new tv?