ac92pathfinder
-
Posts
425 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by ac92pathfinder
-
-
my consil not all there going to junk yard today to get one. my other question was whats the switch for the shocks for? what does it do?
-
it was the master cyl. thanks
-
what does the voltage regulator look like so i dont pull the wrong one by accident
-
-
-
does this mean its the master cyl? if so is it rebuildable?
-
i take that back. Problems with your fuel and temp gauges are common with the 95 and older trucks. On the back of your cluster is a small box with some wires coming out of it going to different points on the cluster. This is a voltage regulator for the gauges and it is known to fail. I got a new one at my local dealer for about $25 and it took about a total of 2 min to replace. (from MrReverse) is this located behind the instrument cluster do i have to remove that? also my heater controls dont work the hot and cold does along with the fan but i can get the controls like the defrost and sround that area to work also they dont light up. just my speedometer area. i checked for blow fuses i didnt see any.
-
i didnt see it in there. also i have brake fluid leaking between the master and booster is this a master cyl problem? if so is it rebuildable? thanks
-
i have a 92 pathfinder xe 3.0 someone by passed the plug thaty goes into the temp switch to the battery instead i plugged it into the switch but doesnt work along with the gas gauge. if i leave it on the battery i get back and fourth readings like one time it said i was over heating and it would sit on cold too. what can i do to fix this? thanks
what does the e-at button do?
in General Forums
Posted
just curious. im looking on getting a owners manual soon