Jump to content

JUDGE

Members
 View Profile  See their activity

  • Posts

    336

  • Joined

  • Last visited

 Content Type 

Posts posted by JUDGE

    Moment of Silence...

    in Off-Topic

    Posted

    I would like to think it's not that people don't care a soldier dies, it's just they're accustomed to it, as sad as that is. In my opinion the media is to blame regarding this whole MJ circus.

    Pranks and practical jokes

    in Off-Topic

    Posted

    If you really want to get someone try this,

     

    Fill a Mason jar half way with milk, then add a chicken leg, close the jar as tight as you can. The decomp pressure will build up and pop the lid, just don't be there when it does. Perfect for stashing behind a desk or dresser.

     

    The smell is effin sick.

    Rebiulding my vg30 dose anyone make aftermarket pistons

    in 90-95 WD21 Pathfinders

    Posted

    hello,

     

    So I have a 1994 pathfinder 4x4. I pulled compression and im showing 40 in cylinder 4 and 60 in cylinder 6. So I put some oil into the cylinders and it shot compressions up (this tells me its rings). So I am about to remove my engine and rebiuld it at 217k miles. Unless i can find a full longblock or shortblock. The cylinders look really washed down (lack of cross hatching).

     

    However looks like i maybe going the rebiuld route. Dose anyone make aftermarket pistons? or longer rods? or anything cool for the bottem end? :deadhorse:

     

     

    Where are you located? I have a short block from a '94 I would sell, only has 60K kilometers.

    What do you guys think?

    in General Forums

    Posted

    Bearings aren't hard to do, just a pita. I have a stock CL with tie rods and idler arm if you need to buy one, I'll let it go pretty cheap. One outer tie rod boot is torn but if your going to relace them... Both sleeves are in good shape.

     

    LMK!

×
×
  • Create New...