GrimGreg
-
Posts
18,491 -
Joined
-
Last visited
-
Days Won
13
Content Type
Profiles
Forums
Calendar
Posts posted by GrimGreg
-
-
I nominate AK9848cy:
Isn't that his Hardbody?
-
Not common, but it might be a problem with the distributor shaft, or the crank angle sensor. Does the rotor turn when you crank it?
-
The body sheet metal is thin enough to use aviation sheers on if you didn't want to use a cutoff wheel. I cut mine a 1/4" long and bent it over to restrengthen the edge when I cut my 88s.
-
RC Rock Crawling is about my only current "hobby"
Shot from a local comp
Here is my crawler, Axial AX10
-
No one is STARTING anything. you're the one that seems to be hot on the trigger with throwing accusations. Get your head straight dude.
Really, everytime someone says something he doesn't like, he flys off the handle like a huffy, puffy, 2 year old.
- 1
-
tinting the tails is also illegal
So is non-DOT lighting.
There are a few states that check too.
-
I had to ratchet strap one side on mine, the one side went right in, but then it limited the movement to get the other one in without some help. As long as you hook it right, and the strap isn't worn out or to light duty, it is just fine.
-
I tend not to video myself. But have been caught on video, search "Pathfinder on rocks".
-
-
No it was black, I was reading on another forum and a lot of people mention to use the toyota front axle, maybe the one in the pic is a toyota axle, and why there is no front drive shaft as the pumpkin is on the wrong side ?
I believe the guys name is Gator?
Mike (Gator) used to be on 4x4parts.com regularly, I know he pops in on the NOAS board now and then too.
-
Those are a generic roll type, you can get them in wider versions too. They usually attach with sheet metal screws onto the fender lip.
-
Yeah, it sounds like just a break in the circuit; disconnected wire at a plug or bad plug, break in the wire somewhere.
-
You installed the damn things yet?
-
Not sure if this is what you are asking, but:
1. Pull up seat bottom, should be a black strap to pull on to release it.
2. Remove headrest, there is a button on the side of the base.
3. Pull side lever and fold seat back all the way down.
And if the seat bottom sticking up is an issue, undo the 2 12mm bolts on the hinge and remove the bottom completely.
-
WhiteOwl though don't currently have any painted areas coated though I have thrown the idea in my head to do the pink area then paint overtop of it again keeping my pink obviously.
You could always get the 3M rocker spray, it is made to be painted over, or they have a tintable version that you could mix pink.
-
She's the perfect woman, loves her pathy & can destroy a bottle of JD as quick as I can.
She'd drink you under the table!
My fav has to be Monster Energy, original green.
-
Ok, looking at it does it comes apart by the big circlip in the back?
Mine were basically 2 piece, the part that stuck on the stub shaft, and the outer hub. The outer hub has moving parts in it, but I saw no need to dismantle them.
-
I haven't taken it apart yet, sounds like a good ideal to take apart and regrease them! THANKS!
Don't over do it, you just need a light coat, not gobs of goo allover
-
Looking at thae picture it looks like most of your snap ring isn't sitting in the groove, maybe that was part of the cause, or part of the effect?
-
Why the fuss, do you plan to ever remove them? If you want to remove them later, why bother installing them to begin with? If you plan to leave them, what will drilling holes hurt it?
-
Yeah, what do you have; 2wd/4wd? What kind of budget do you have? How extreme do you want to get, do you want to still have it street friendly? Etc. etc.
-
Sounds like you are good to go, it only takes about 5 minutes per hub, so go do et!
-
x2 but maybe do it in june next year?
Maybe, if we can find a weekend that everyone can have free. It would be nice to get at least twice the number we had this time!
-
We should make that an NPORA annual run!
Prerunner pathfinder?
in Off-Topic
Posted
I've seen a few on WD-21s, but have not seen any on a R-50.