rc_cola_j Posted April 15, 2017 Share Posted April 15, 2017 Just curious....has anyone tried pulling the distributor on a R50 and reaching in to get at the knock sensor? Seems like if you have a tiny handed helper it would work. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
RCWD21 Posted April 16, 2017 Share Posted April 16, 2017 I'd imagine it would be a bit of an adventure if someone got their hands stuck in a tight place haha Sent from my SCH-I545 using Tapatalk 1 Link to comment Share on other sites More sharing options...
neilca Posted April 25, 2017 Share Posted April 25, 2017 Subscribed, I need to replace mine also.... Link to comment Share on other sites More sharing options...
neilca Posted April 26, 2017 Share Posted April 26, 2017 Have you seen this https://www.youtube.com/watch?v=4cElUCmLEKE Sensor relocation Link to comment Share on other sites More sharing options...
rc_cola_j Posted June 18, 2017 Author Share Posted June 18, 2017 Have you seen this https://www.youtube.com/watch?v=4cElUCmLEKE Sensor relocation Boom! My mind was blown! I had this thought that if I removed the hood completely I could maneuver in between the engine and firewall and do the same. This may be better Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
neilca Posted June 19, 2017 Share Posted June 19, 2017 I pulled my transmission for a rebuild and was able to reach up and break off the sensor pretty easily. I was going to try and remove the mount bolt but it was too much of a pain to reach. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now