LD50 Posted November 6, 2006 Share Posted November 6, 2006 Anyone else from Alberta? I'm from St. Albert (outside of Edmonton) Link to comment Share on other sites More sharing options...
revgrizzly91 Posted November 6, 2006 Share Posted November 6, 2006 Not too many Albertans will admit to ownin' an import...lol. Link to comment Share on other sites More sharing options...
ILoveMyPatty Posted November 6, 2006 Share Posted November 6, 2006 I might be moving to Alberta to work and see my girly... We'll see though. Link to comment Share on other sites More sharing options...
mikemike Posted November 6, 2006 Share Posted November 6, 2006 edmontonnnnnnnnn Link to comment Share on other sites More sharing options...
Pezzy Posted November 7, 2006 Share Posted November 7, 2006 http://www.cn4xc.com/ Link to comment Share on other sites More sharing options...
Dowser Posted November 8, 2006 Share Posted November 8, 2006 Dowser here. From up in Fairview. hour and a half north of Grande Prairie. And speaking fo St. Albert... thats where I bought the second Pathfinder from and BOY oh BOY I wish i would have known you before I took a bus all the way down there to buy it. Link to comment Share on other sites More sharing options...
mikemike Posted November 8, 2006 Share Posted November 8, 2006 edmonton blows compared to calgary, thats for suree Link to comment Share on other sites More sharing options...
Mookie Posted November 9, 2006 Share Posted November 9, 2006 Calgary here! Link to comment Share on other sites More sharing options...
mikemike Posted November 12, 2006 Share Posted November 12, 2006 hey LD50 where do you fo wheeling?? Link to comment Share on other sites More sharing options...
LD50 Posted November 12, 2006 Author Share Posted November 12, 2006 I havent done much lately. Bald non-grippy tires don't do to well. I'll be looking ot do some in the spring though for sure... not sure where yet. Link to comment Share on other sites More sharing options...
iLLlegal Posted November 25, 2006 Share Posted November 25, 2006 hey buddy. ya i live in st.albert to. if you find some wheelin places let me know.. cuz the most ive tried to do around here are in construction sites lol. Link to comment Share on other sites More sharing options...
mikemike Posted November 25, 2006 Share Posted November 25, 2006 yea im far south of ed so theres a lot of construction.. with all this snow i have had to help a few people get outta slippery situations Link to comment Share on other sites More sharing options...
arctic_mark Posted November 28, 2006 Share Posted November 28, 2006 Hey, if you're interested in wheelin' round Edmonton come out with the Northern Alberta 4WD Association. I'm the only Pathy driver in the club (Nissan Man on the NA4WDA forum) and need company! :sniff: We meet every wednesday night around 7pm for wings etc at the Montana's down by Ikea in South Edmonton Common , except for the first Wednesday of each month at 7:30pm which is our monthly planning meet at the Alberta Safety Council building (4831 - 93Av). Some of our details are on our (honestly not brilliant) Web Site but far more happens on the club Forum though this seems to have been hacked by some A-hole today! :furious: As for trips we go out atleast once a month with both weekend overnighters and day trips from mild to pretty heavy duty. We don't post pics or trips on the website 'cos the tree-huggers read it, but if you're a member you can access the members only stuff on the forum and show your muddy pics and get trip details. Our next trip is a Santa's Anonymous run on Sunday Dec 3rd through Edmonton. Check out the website for details. We're also planning a Christmas Tree Run in the snow to west of Drayton Valey for Saturady Dec 9th. Anyway, I'd love to see some real 4x4s in the club and less of these damn Jeeps! Maybe see you on Wednesday night Mark Link to comment Share on other sites More sharing options...
mikemike Posted November 29, 2006 Share Posted November 29, 2006 im afraid i would be too stockkk Link to comment Share on other sites More sharing options...
arctic_mark Posted November 29, 2006 Share Posted November 29, 2006 Hey mikemike Don't worry about being too stock. I was wheelin my '94 SE V6 Pathy with the NA4WDA for a good 12 months bone stock. All the Jeep drivers where amazed how my "grocery wagon" behaved without any mods!! Got a 3 inch suspension lift and rear sway bar discos that do help but I'm still running half balled 31' ATs from Crappy Tire and do fine. All you need as an absolute minimum to come on most trips is working 4hi and 4lo, sound steering and brakes, a good tow strap (loops, not end hooks) and secure recovery points front and back. A CB, fire extinguisher, tool kit and 1st Aid kit are desireable but not neccessary if you just want to come along to try for a run or two. As I said, the invitation's there to all Nissan's (and any other makes!) in northern Alberta! Mark Link to comment Share on other sites More sharing options...
iLLlegal Posted December 2, 2006 Share Posted December 2, 2006 id defiently be up for that. i usually work from 2:30 to 1am though haha ;p. but come spring that job will be over so ill try and find some time to go out cuz it sounds fun:D Link to comment Share on other sites More sharing options...
LD50 Posted December 3, 2006 Author Share Posted December 3, 2006 iLLlegal.... I spotted a dark green or black pathy at Canadian tire the other night. 4x4parts.com sticker on the back window, 3" BL, coils, UCA's... was that yours by chance? Link to comment Share on other sites More sharing options...
iLLlegal Posted December 6, 2006 Share Posted December 6, 2006 i wish i had a BL man. mines the gray colour, only have 3" lift in the back. I have a NPORA sticker and macbeth sticker on the rear window ;p Link to comment Share on other sites More sharing options...
mikemike Posted December 6, 2006 Share Posted December 6, 2006 i'll see how my new pathy runs if i get(fingers crossed) Link to comment Share on other sites More sharing options...
LD50 Posted December 7, 2006 Author Share Posted December 7, 2006 It looks good.... check that frame for rust too! Link to comment Share on other sites More sharing options...
arctic_mark Posted December 7, 2006 Share Posted December 7, 2006 Yeah, that frame is a bummer. Had to have the rust cut out and patched from my frame, above the rear wheels, a while ago. If you can get rid of that nasty rear bumper (its really prone to rusting out anyway) and replace with a tubular job or rock crawler you can get the hose or jet washer into the open ends of the frame and really flush it out. I think there is a weld along the seam on the inside of the frame that acts as a shelf and collects all the dirt and water and is just a perfect site for the rot. Link to comment Share on other sites More sharing options...
ChaseZero Posted August 18, 2008 Share Posted August 18, 2008 Grande Prairie, Alberta here, I've got a stock early 99 SE and a stock 91 XE 2 door. I don't usually count the '87 se parts pathfinder. Chase Link to comment Share on other sites More sharing options...
kneedeep Posted August 20, 2008 Share Posted August 20, 2008 Edmonton here, just picked up pathy # 2 for a winter ride to keep the sports car nice and clean over the winter. current pathy is a 95 xe, last one was a 97 se- perfect for winter and getting up to the mountains. Link to comment Share on other sites More sharing options...
ChaseZero Posted August 27, 2008 Share Posted August 27, 2008 Is there much for wheeling down in Edmonton? Link to comment Share on other sites More sharing options...
mennonitemike Posted August 27, 2008 Share Posted August 27, 2008 Calgary, here! broke rocker arm assembly and the bolt holes are now stripped! No wheelin' for me Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now