John Boy Posted June 22, 2006 Share Posted June 22, 2006 So my timing belt job was a success but am notcing that my brake and fuel lines need replacing, they are really corroded. Those are some mighty long lines going to the back, is there any place I could get them already pre bended? Link to comment Share on other sites More sharing options...
94extreme Posted June 22, 2006 Share Posted June 22, 2006 napa is almost a sure shot but they will be somewhat expensive.. if you can bend them yourself (requires a bending tool) you could save a bunch. of course there is the dealer. i'd call them just to compare because you never know, they may be competitive. Link to comment Share on other sites More sharing options...
John Boy Posted June 22, 2006 Author Share Posted June 22, 2006 (edited) Thanks, Anybody have any success with these http://www.4x4parts.com/public_html/shop/i...e40868bc486f9d2 Edited June 22, 2006 by John Boy Link to comment Share on other sites More sharing options...
94extreme Posted June 22, 2006 Share Posted June 22, 2006 get them if you have the $$$, they are better then crappy rubber stock ones. for sure! Link to comment Share on other sites More sharing options...
cdhicks99 Posted June 22, 2006 Share Posted June 22, 2006 Thanks, Anybody have any success with these http://www.4x4parts.com/public_html/shop/i...e40868bc486f9d2 Stainless is always good insurance! Link to comment Share on other sites More sharing options...
John Boy Posted June 22, 2006 Author Share Posted June 22, 2006 Thanks! The dam dealer wants $65 for one rear brake line. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now