Jump to content

93 W/JGC Springs and Enclosed Trailer


keithb7
 Share

Recommended Posts

A few weeks ago I posted my piece about installing GJC springs in my 1993 Pathfinder for the purpose of increasing load capacity on the rear end. This was in preparation for the arrival of my enclosed fiberglass trailer. We use it to haul around our toys (dirtbikes & ATV). The springs are perfect. I have included a photo of the Pathy with the loaded trailer attached. In it is about 700 or so pounds. No rear end sag at all.

In the photo I am parked on a level surface, the hitch is higher than the trailer therefore it tilts up when installed on the Pathy.

 

- Keith

 

IMG_0368.JPG

Link to comment
Share on other sites

I opted to take wifey's expedition to pick-up my project pathy a few weeks backs thinking too much weight for jgc springs. After I got it home I moved the trailer around in the yard with the Pathy. Fender well still cleared top of tires by 1.5". that was a dual axle trailer w/ '92 pathy centered.

 

It was probably good idea not to use the pathy, needless abuse on the rear end and most likely would have driven the 100+ miles in 4th.

 

Glad your happy with the mod!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...