Jump to content

My pathy


Pathfinder-jay
 Share

Recommended Posts

I own a 1991 Nissan Pathfinder XE 4dr 4x4. Visit www.pathfinderxbuild.com to see some pics/details on my project and goals. Looking for members to help me out if possible.

 

Well let me start with what I have done:

 

-Installed new brake line

-Installed new brakes (ceramic), new pads, new discs... the whole systeme

-Rebuilt gas line (custom)

-Full engined tune up for the spark plugs where melted into the distributor and all the wires where dried out (cracked under small pressure)

-Welded and changed gaskets on exhaust ( like new now)

-Changed high and low side pressure hoses for power steering

-Fixed some wiring problems since my electric locks and trunk werent working

-Got a new motor for the back windshield whipper

-Replaced glove compartment

-Complete wheel alignment

-Changed 2 tie rods

-Fixed 1 fender temporarly for winter untill spring... when I will buy a new one

-Brand new UNIROYAL tires... small for now

 

Things needed to be done?:

-Replace both fenders (rust on both)

-Replace driver side door panel

-Fix 2 plates that split under driver side floor

-Weld and replace some parts of body under back right passenger seat.

-Replace front and back bumper

-Replace front head lights

-Fix rust on roof and trunk

-Summer tires

 

Things id like to do:

-Give a 3" raise

-Add a roof rack for my snowboard/camping trips

-Add a pushbar with lights and winch

-Repaind the truck

-Customize some parts so I can offroad ( still learning the parts)

 

As you guys can see I love my truck, and I will never give up!

Jason

P.S. Let me know if anyone is interested in joining, e-mail me at jason@pathfinderxbuild.com or add me on msn at jason@m-e-tech.com

Link to comment
Share on other sites

No one has anything for me? advice etc... interest! help this fellow pathfinder lover out guys common lmao :)

seriously use the search function.. this stuff has been covered a 1,000 times recently.. if i wasn't so tired i'd find you some links myself.... :beer:

Link to comment
Share on other sites

ok. PM grimgreg because i think it was him who just did a really good write up about rust removal/repair on the frames.. i looked but our search function sucks big time and couldn't find it...... the answer is out there...lol :beer:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...