Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

My pathy


Pathfinder-jay
 Share

Recommended Posts

I own a 1991 Nissan Pathfinder XE 4dr 4x4. Visit www.pathfinderxbuild.com to see some pics/details on my project and goals. Looking for members to help me out if possible.

 

Well let me start with what I have done:

 

-Installed new brake line

-Installed new brakes (ceramic), new pads, new discs... the whole systeme

-Rebuilt gas line (custom)

-Full engined tune up for the spark plugs where melted into the distributor and all the wires where dried out (cracked under small pressure)

-Welded and changed gaskets on exhaust ( like new now)

-Changed high and low side pressure hoses for power steering

-Fixed some wiring problems since my electric locks and trunk werent working

-Got a new motor for the back windshield whipper

-Replaced glove compartment

-Complete wheel alignment

-Changed 2 tie rods

-Fixed 1 fender temporarly for winter untill spring... when I will buy a new one

-Brand new UNIROYAL tires... small for now

 

Things needed to be done?:

-Replace both fenders (rust on both)

-Replace driver side door panel

-Fix 2 plates that split under driver side floor

-Weld and replace some parts of body under back right passenger seat.

-Replace front and back bumper

-Replace front head lights

-Fix rust on roof and trunk

-Summer tires

 

Things id like to do:

-Give a 3" raise

-Add a roof rack for my snowboard/camping trips

-Add a pushbar with lights and winch

-Repaind the truck

-Customize some parts so I can offroad ( still learning the parts)

 

As you guys can see I love my truck, and I will never give up!

Jason

P.S. Let me know if anyone is interested in joining, e-mail me at jason@pathfinderxbuild.com or add me on msn at jason@m-e-tech.com

Link to comment
Share on other sites

No one has anything for me? advice etc... interest! help this fellow pathfinder lover out guys common lmao :)

seriously use the search function.. this stuff has been covered a 1,000 times recently.. if i wasn't so tired i'd find you some links myself.... :beer:

Link to comment
Share on other sites

ok. PM grimgreg because i think it was him who just did a really good write up about rust removal/repair on the frames.. i looked but our search function sucks big time and couldn't find it...... the answer is out there...lol :beer:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...