vengeful Posted August 4, 2005 Share Posted August 4, 2005 That doesn't look that bad. Toss a receiver on there and it'll be pretty nice. Could be cleaned up a bit, but all in all, its not bad. Link to comment Share on other sites More sharing options...
KILLVOX Posted August 4, 2005 Share Posted August 4, 2005 Very, very ugly. :oops: When i orderd my bull bar, I believe he called it an "A bar". Mabey you can call them and ask for that. Make sure you tell them if you have a body lift or not. Good luck. I will see if i have some old paperwork on it, mabey a part #. Link to comment Share on other sites More sharing options...
iLLlegal Posted August 4, 2005 Author Share Posted August 4, 2005 I really wanted to know how you got the mesh in there on your grill killvox. you didnt pm me back anywooo ya those sterling bars=ugly! Link to comment Share on other sites More sharing options...
Vsicks Pathy Posted August 4, 2005 Share Posted August 4, 2005 Very, very ugly. :oops: When i orderd my bull bar, I believe he called it an "A bar". Mabey you can call them and ask for that. Make sure you tell them if you have a body lift or not. Good luck. I will see if i have some old paperwork on it, mabey a part #. Do you remove your driving lights when you go off road Killvox? Link to comment Share on other sites More sharing options...
FLApathy Posted August 5, 2005 Share Posted August 5, 2005 looks like they got lund headlight covers on them Link to comment Share on other sites More sharing options...
Vsicks Pathy Posted August 5, 2005 Share Posted August 5, 2005 looks like they got lund headlight covers on them Thats not gunna stop them being smashed though. Link to comment Share on other sites More sharing options...
KILLVOX Posted August 5, 2005 Share Posted August 5, 2005 I really wanted to know how you got the mesh in there on your grill killvox. you didnt pm me back The mesh is actually Gutter covers from Home Depot. I just cut pieces out and popped them in. Do you think the bars on the web site are ugly or the ones on my truck? Link to comment Share on other sites More sharing options...
Vsicks Pathy Posted August 5, 2005 Share Posted August 5, 2005 I really wanted to know how you got the mesh in there on your grill killvox. you didnt pm me back The mesh is actually Gutter covers from Home Depot. I just cut pieces out and popped them in. Do you think the bars on the web site are ugly or the ones on my truck? The nudge bar on you car looks fine. It is very low though and "MUST" hinder your ramp angles something shocking. Your driving lights are just as low. I would smash them even before 4wd was selected. The lights should sit at the top of the bar, level with your grill. As for the mesh, if you like it it's all good. I have mesh behind the grill on the radiator support. It helps to keep the thick mud out and blocking the radiator. Link to comment Share on other sites More sharing options...
KILLVOX Posted August 6, 2005 Share Posted August 6, 2005 The lights lasted about three days there before i took them off and put them on the roof. I agree with you, they were way to low. Im putting a 3in. susp. lift on it, hopefully it will help with the angle. as for the mesh, i now have it behind the grill.Doing some fab work to the grill to open it up. cutting out some of the thinner cross pieces. Link to comment Share on other sites More sharing options...
Vsicks Pathy Posted August 6, 2005 Share Posted August 6, 2005 The lights lasted about three days there before i took them off and put them on the roof. I agree with you, they were way to low. Im putting a 3in. susp. lift on it, hopefully it will help with the angle. as for the mesh, i now have it behind the grill.Doing some fab work to the grill to open it up. cutting out some of the thinner cross pieces. Good stuff. Link to comment Share on other sites More sharing options...
KILLVOX Posted August 8, 2005 Share Posted August 8, 2005 Well, I cut out the thinner pieces in the grill and this is the result. Link to comment Share on other sites More sharing options...
iLLlegal Posted August 8, 2005 Author Share Posted August 8, 2005 wow I like it..thats what I was thiinkin of cutting out the smaller peieces in the grille. you might need a little bit more fitting...o and for the 3 hood grilles..how did you put those in..just overtop the other rubber cover ? Link to comment Share on other sites More sharing options...
Vsicks Pathy Posted August 8, 2005 Share Posted August 8, 2005 I am impressed. It came up 100%. :bow: Link to comment Share on other sites More sharing options...
KILLVOX Posted August 9, 2005 Share Posted August 9, 2005 The pieces for the 3 hood slots are held in by pieces of wire. Thanks for the props. I thought it came out pretty sweet. -bounce- Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now