Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Electrical Problem With My Turn Signals/4ways


Guest OffRoadRecovery
 Share

Recommended Posts

Guest OffRoadRecovery

Hi everyone, I am new to pathfinders, we just bought this 93 about a month ago. My wife called me the other night saying that the turn signals stopped working and there was smoke in the truck. As she was telling me this she said OH the 4ways just stopped. I asked her if the vehicle was still running and she said yes so I told her to drive it the 2 blocks to the house.

 

Once she got home I looked at the situation. If you turn on the signal either way, The brake Idot light on the dash comes on and a relay which is attached to the brake petal support buzzes. Unless you turn on the flasher switch in which case turning on the turn signal does nothing. the turn signal light bulbs do not light, on the dash or corners of the vehicle.

 

Today I dug into this, doing what I could without a wiring diagram. I expected to find some burn wires to fix but none were visable anywhere I could see or feel.

I dug into the dash removing the trim plates from around the column and removing the instrument cluster. all the wiring seems fine. I have not been able to get to the main trunk of the harness which is in an inclosed area next to the defrosters. The wiring under the hood looks good.

 

Has anyone seen anything like this before? I searched the archives and did not find anything.

 

My other question is who sells shop manuals for these trucks. I have not tried the dealer that would be my last resort.

 

Thanks, for the help.

 

Dave

Link to comment
Share on other sites

Dave

 

My Chilton manual has a wiring schematic for your vehicle (p. 6-31) Sorry I don't have a scanner, I could send you a copy. Maybe somebody else here can?

 

It looks like the turn-signal switch and the emergency flasher tie into the same wires (gry/red - RH side; gry/blu - LH ). Try disconecting the switches one at a time to see if you can narrow the problem down. The LH and RH only share at the switches so my (uneducated) guess is that's where your problem lies.

 

One thing you have in your favor is that your lights are dead all the time. That usually makes tracing the problem easier than when the problem comes and goes.

 

Hope this helps and good luck.

 

Brian

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...