R50 series l tailights

[MarcosPathy]

Is there any difference in fitting specs between taillights between the r50 series l and the r50 series ll 

Finding it difficult to located series l taillights but plenty of series ll 

thanks 

[hawairish]

13 hours ago, MarcosPathy said:

Is there any difference in fitting specs between taillights between the r50 series l and the r50 series ll 

Finding it difficult to located series l taillights but plenty of series ll 

thanks 

 

Fitting, no.  Bulbs were in different locations and different lens colors, but I presume the bulb sockets and fitment into the housings were the same (might be able to swap the pigtails if the bulb sockets were different).  Though I don't think you had the Infiniti models there (where there Regulus models there or was that just another Terrano trim?), the QX4 models here also fit all the same, except they lacked reverse lights, which were located on the liftgate around the license plate.  You probably wouldn't want those, if they existed there.

[MarcosPathy]

5 hours ago, hawairish said:

 

Fitting, no.  Bulbs were in different locations and different lens colors, but I presume the bulb sockets and fitment into the housings were the same (might be able to swap the pigtails if the bulb sockets were different).  Though I don't think you had the Infiniti models there (where there Regulus models there or was that just another Terrano trim?), the QX4 models here also fit all the same, except they lacked reverse lights, which were located on the liftgate around the license plate.  You probably wouldn't want those, if they existed there.

Bulb placement isn’t an issue. Just as long as the housing is the same. I’ve been searching for them around Australia and have been quoted $300 for a pair of series l r50 tailights. Were as the series ll I can pick them up for dirt cheap

I don’t believe the QXF models were released in Australia. (I could be wrong)