Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Fog lights and switch don't work

willaay

By willaay,
in 90-95 WD21 Pathfinders

 Share

Recommended Posts

willaay NPORA Newbie

willaay

Posted
Posted

The fog light switch hasn't worked since I bought the truck so neither have the fog lights. I haven't troubleshooted deeply but wanted to see if there was anything obvious to look for?

 

QQQ6SKg.png

84PcB0X.png

 

Link to comment
Share on other sites
Slartibartfast NPORA Old-Timer

Slartibartfast

Posted
Posted

The wiring is just spade terminals from behind. It was a dealer install as far as I can tell. Should be an aftermarket-looking relay bolted to the firewall near the passenger's side hood hinge or the wiper motor, and a fuse holder hanging off the positive terminal on the battery. I would start by finding the fuse holder and making sure it's still connected and still has a good fuse in it, then check for power to the relay. IIRC you've got a wire tapped into one of the low beam wires inside the steering column clamshell, running from there to the switch, then from the switch to the relay coil, then to ground.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...