NovaPath Posted June 25, 2017 Share Posted June 25, 2017 Can anyone confirm that the automatic transmission breather line is routed up high in the engine bay by the fire wall? I have read that the t-case and front diff are... Trying to figure out how much line to buy for my breather extension, down here in FL the puddles get deep quick it appears..... Unrelated, I made a sweet "on the fly engineering" air box fix prior to my trip today. I used Gorilla Tape to cover the original intake from the wheel well, drilled a couple of 2" holes in the airbox( BEFORE, the filter...), and then siliconed a cut in half piece of tupperware to the airbox top to act as a splash shield for the newly drilled holes. Shocking thing was, it actually worked.....Had it up to the tops of the wheels more than once and the intake was 100% dry. The created "Splash Shield" has plenty of evidence of water droplets drying on it as well. Had I not done it, I have a feeling after today I'd be asking who has swapped the motor in these things...lol. Thanks, Link to comment Share on other sites More sharing options...
neilca Posted June 25, 2017 Share Posted June 25, 2017 The breather line is attached by one of the bellhousing bolts on the top of the bellhousing, really hard to see. Link to comment Share on other sites More sharing options...
onespiritbrain Posted June 26, 2017 Share Posted June 26, 2017 Dude you saved yourself a mountain of trouble.. I just got finished replacing my engine due to water intrusion in very deep mud. Not fun! I am pretty sure my breathers were VERY close to being submerged.. the trans and tcase are, like neilca said, on top of the bell housing and the front diff is on the driver side of the engine. Front diff is probably more exposed than the trans and tcase. We need to see if we can intake from the passenger cowl if it's big enough.. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
NovaPath Posted June 27, 2017 Author Share Posted June 27, 2017 How far up do they extend past the top of the bell housing? Pretty sure I had it that deep a couple of times, was worried about water coming in through the door seals more than once. Thanks! Link to comment Share on other sites More sharing options...
Snowboarder12345 Posted June 27, 2017 Share Posted June 27, 2017 Was just in there last night. If they go up further it can't be more than an inch or two. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now