92 Pathfinder stalls while turning sharply

[ebell92]

I need help with this. i recently got my belts replaced but ever since then the car will stall if i turn sharp around corners, for example into parking lots or angled roads. I dont know if the belts have anything to do with it but its really annoying.

[Cuong Nguyen]

Sounds like a loose wire.

[Slartibartfast]

Does it stall if you turn the wheel to its limit at a stop? There's a pressure switch on the power steering system that tells the computer to bump the idle up when the pump is working hard--as it is when you're running it against the steering stop (full lock). Could be that your switch isn't working, and the steering pump is stalling the engine when you're off the gas and working the steering hard. Swapping belts shouldn't cause that (unless you knocked the wires off the sensor) but the old belt might've been slipping enough to prevent a stall.