Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Fuel injector plugs -- what orientation?


Cuong Nguyen
 Share

Recommended Posts

 

Can someone take a picture or confirm the orientation of the driver side injectors on their vg30 or vg33? I forgot how mine is suppose to be wired and I am guessing the longer plug wire goes to the front most injector and the shortest goes to the far back one.

Link to comment
Share on other sites

I don't remember quite how they went when I put mine back together, and it's kinda hard to see now with the intake on. I numbered mine before removing them but IIRC the wiring is tight enough that you'd have a hard time doing them up out of sequence.

 

If you're not sure, you could check the color codes on the injector wires against the diagram in the service manual.

Link to comment
Share on other sites

Yeah, that's what I ended up doing the other day. I had to pull back the plug covers to expose the wires to figure it out. Ended it being that I had it wired backwards. While at it I checked my other wiring and switched two plugs for the IACV and knock sensor. God I hate those metal clips on these plugs.

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...