Mtnpathy93 Posted January 18, 2016 Share Posted January 18, 2016 I have a 93 Pathy SE, 96k miles. The front suspension seems to be about 2" lower than the rear. I assume the torsion bars are sagging, however, I've read posts that warn about torsion bar crank to obtain additional front ride height. I also don't want to make the vehicle impossible to align, due to it being my daily driver. I saw the that SuperLift makes control arms that give 2.5" of front lift. Does anyone run these? And what else will I need to do to ensure alignment? Are there other parts needed for these arms to work correctly? Also , I still have the stock Electronic Adjustable shocks, any ideas on good shocks? ProComp ES 3000 or Bilsteins? Thanks! Link to comment Share on other sites More sharing options...
RIPB.88 Posted January 18, 2016 Share Posted January 18, 2016 You still have to tighten the torsion bars and possibly even reindex them. Theres a few good threads on that. And as far as the shocks go, I like Bilsteins because they feel firmer. But thats more of a preference. Front shock part # is 24-012454 and rear is 24-185097. Link to comment Share on other sites More sharing options...
Mtnpathy93 Posted January 18, 2016 Author Share Posted January 18, 2016 Thanks for the info RIPB.88... I'll read the other threads. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now