Chook Posted September 21, 2015 Share Posted September 21, 2015 I suspect it is under this little clip I have pointed at in red, but I can't seem to get this clip off. I can pry up at the front of it, but it seems like it will break. Does it slide out or something as opposed to prying up? Would appreciate any help as the front crossbar is about 4" to far forward on the drivers side compared to the passenger side. Looks stupid. Link to comment Share on other sites More sharing options...
Pav Posted September 21, 2015 Share Posted September 21, 2015 Lift up the rubber strip in the middle and there should be another screw to undo that will release the cap. I just hope that you don't have the same hex/lobe pin screw there for security. I've still been trying to find a key to undo mine. If its in good shape a torxs pin key should work to get it out. 1 Link to comment Share on other sites More sharing options...
Chook Posted September 21, 2015 Author Share Posted September 21, 2015 (edited) Thanks Pav I"m going out to try it now. Aw crap, it's the same as you say. It looks like an allen key with a pin in the middle. Would that have come with the Pathfinder? I wonder if Nissan carries it. Edited September 21, 2015 by Chook Link to comment Share on other sites More sharing options...
Chook Posted September 21, 2015 Author Share Posted September 21, 2015 (edited) You gotta love one owner vehicles. I was looking around in the glovebox and found a package with the original installation guide for the roofrack and inside was the allen key with a hollow center. It is just a 4mm hex wrench with hole in middle. The roof rack clip is just all plastic including the allen screw with security pin. You could just get some fine needle nose pliers and grab that pin and twist it off, then use a regular 4mm allen key. The bag this is in is Part No. Ha-1255-000-00 if that helps you. Hope that helps you Pav. Edited September 21, 2015 by Chook 1 Link to comment Share on other sites More sharing options...
Precise1 Posted September 21, 2015 Share Posted September 21, 2015 So, as someone who works with tools for a living, I can testify that these are pure sheit, but they'll get the job done a time or two... The world is your oyster security fastener remover kit. http://www.harborfreight.com/33-pc-security-bit-set-68459.html B 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now