ARB / OME WD21 Lift Springs Height?

[SteeevO]

I know that the R50 guys have been using the OME springs to get about 2" of lift even though they are spec'd at 0.5".
OME does have a rear spring part number of #2920. Does anyone here have personal experience this this spring? are they getting .75" ? or maybe more?

 

A good deal awaits to anyone willing to take a change and experiment.

Ph:909-547-4651

[mechanicalbaron]

I know that the R50 guys have been using the OME springs to get about 2" of lift even though they are spec'd at 0.5".

OME does have a rear spring part number of #2920. Does anyone here have personal experience this this spring? are they getting .75" ? or maybe more?

 

A good deal awaits to anyone willing to take a change and experiment.

Ph:909-547-4651

 

 

 

I got a set from you early this year, I got a little over 1 3/4" lift. I'm not sure how much the stock springs were sagged out. I've been really happy with them so far. The ride is good, not to stiff.

 

 

Sent from my SCH-I535 using Tapatalk

[Frenchy]

From stock the lift height will be about 0.75 inches. With my Pathfinder it went up about 2 thanks to the worn out suspension