kev9180 Posted May 11, 2015 Share Posted May 11, 2015 Brake light/ running tail light not working due to the pole where the wire goes not conducting electricity. The crimp(?) that holds the wire in place isn't in there so its not making contact with the other end for the lights to work. What should I do for this? New wire terminal? http://imgur.com/kBq8zzb Link to comment Share on other sites More sharing options...
kev9180 Posted May 11, 2015 Author Share Posted May 11, 2015 Its the bottom right pole in the picture, its basically just an enpty port that doesn't have the little piece in there that keeps the wire in place so it can touch the other piece on the male harness Link to comment Share on other sites More sharing options...
R3DN1CK Posted May 12, 2015 Share Posted May 12, 2015 Strip back some wire, feed it through the connector. Crimp/Solder the connector and pull it back into the socket. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now