95 Pathy SAS

[Crash]

Im new to this fourm and starting a solid axle swap on my truck. Found a set of dana 44 matched front and rear out of a 86 wagoneer wondering what i need to do to make the steering work? Take the whole steering box from the waggy and fabricate to fit my frame or is there a more simple way of doing it?

[87pathy]

You can use the stock pathfinder steering box. No worries. Been running mine for 8 years on 38's

[Cuong Nguyen]

Yup. Stock box.

[kdj]

You can use the stock pathfinder steering box. No worries. Been running mine for 8 years on 38's

I know this an old post but I refuse to take steering advice from anyone that parks on their roof!

[ABCAB]

My 97 D21 Hardbody got its SFA last year to a C200 MQ Patrol axle.

 

I think the Pathy steering box setup is the same as mine.

 

I simply fabricated the standard tierod ends from the Hardbody to a steering link from the steering box to a custom bracket on the kingpin housing.

 

I did however cut and change the angle of my standard steering pitman arm.

 

But this was due to a SOA that gave me a 7" lift.

 

Not sure if this helps as we never had that Pathfinder in our country and how similar our setups are.

 

Sent from my GT-I9300 using Tapatalk

[ABCAB]

Oops, my pics did not post.

 

 

 

 

Sent from my GT-I9300 using Tapatalk